Search:

Type: Posts; User: fastford

Search: Search took 5.34 seconds.

  1. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    maybe the old man had figured out that a thin...

    maybe the old man had figured out that a thin wall would dissipate heat way back then , because my understanding is thats what brought about the thinner 350 castings that came later IDK......
  2. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    i was always curious why there was no evidence of...

    i was always curious why there was no evidence of core shift on the 307 blocks , an old man that helped me years ago loved the 307 block because of this , he bored them to a 350 and swore they were...
  3. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    the easiest way to detect core shift on a SBC is...

    the easiest way to detect core shift on a SBC is to look at the machined surface around the front cam journal where the gear runs , if that surface is the same thickness all the way around its...
  4. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    lizard , from my experience , the early 350...

    lizard , from my experience , the early 350 casting with just 010 were the best , they had less core shift ( did your guy in the foundry explain this ) and could easily be bored .060 and have good...
  5. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    i have herd of this before but i dont know about...

    i have herd of this before but i dont know about the nickle part , the 509 block with only 2 freeze plugs per side instead of 3 was the best IMO , and had less core shift and most can be bored .060...
  6. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    its like every thing else over4t , its according...

    its like every thing else over4t , its according to what you are trying to do with it , i did some work for a guy that asphalt raced a limited type car that required a bone stock crank shaft , every...
  7. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    only time i have had to use a smaller base circle...

    only time i have had to use a smaller base circle cam was with a 4 inch stroke , that 3,5 stroke should easily clear a standard cam.......
  8. Thread: 377 sbc

    by fastford
    Replies
    30
    Views
    4,164

    all that is good advice billet , one thing to add...

    all that is good advice billet , one thing to add , i cant remember where we got them , my dad may have made them , but we used still spacers in the mains and aligned bored them to 350 size , we also...
Results 1 to 8 of 8

All times are GMT -5. The time now is 03:09 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2021 vBulletin Solutions, Inc. All rights reserved.