View Full Version : mustang lower control arm
mustangracer24
12-23-2012, 03:03 PM
I have a 1980 model foxbody mustang and I was wanting to know if they are a longer lower control out there so I can get a little more camber. I already have caster camber plates but I can only get -4 camber on the right side and it isnt enough.
84Dave
12-23-2012, 03:57 PM
Rules permitting, add some length to the lower arm? -84Dave-
Dirtss70
12-23-2012, 04:23 PM
I've heard '89 and up the lower right a-arm is longer. I don't know for sure but maybe someone on here can answer if it's true.
dannyracer6
12-23-2012, 05:57 PM
The T bird lower will work too. It is longer.
mark41
12-23-2012, 08:56 PM
95 and up lca's are 1 inch longer and yields roughly 6 degrees of negative camber, with a stock type upper strut towers.
millerlt3
12-28-2012, 08:50 PM
stock fox body is 13" from centerline to ball joint center the 89 svo has 14" center to center and i believe the tbird is 13 3/4
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.