Search:
Type: Posts; User: 5dirtracing
Search:
Search took 0.36 seconds.
-
i would try 275 on the left rear and put the 225 on the right that will tighten the car up on exit. May need to go up to an 800 on the left front and 900 on the right. Left front needs more weight...
-
do you still have chassis if so can you send pictures to my e-mail ( dirtracing5@gmail.com )
-
1300lbs -1100lbs and a sway bar; way way way stiff will burn the right front off in 5 laps. I would run 700lbs on both sides. need to find a gear that will work in 2nd.
-
dont like the rubber gasket had same problem.. I use RTV
-
ford deck height taller than chevy making it wider also. weight difference around 30lbs. if use the 347 ( 302 stroker ) ford would be around 40lbs lighter than chevy. now a 351 cleveland is around...
-
get one for chevy trans take the front bearing retainer/ throwout bearing sleeve machine it so the chevy hyd. throwout bearing will slide over it . thats what i did on mine
-
if you run a t5 you can take 5th gear out because it is in the tail shaft housing area and weld the shifter guide plate to block of 5th gear groove and make it a 4 speed. the early small block...
-
if you planning on running a ford car use crownvic frame and put the granada body on it then take the rest to the crusher
-
Pennzoil GT1 25-50 no problems
-
all the leaf cars i've had were tight feeling and needed the RR trailed to get it to turn because no rear steer can be built in them. stagger helps but alot of stagger puts drag on the straights as...
-
it is the newer ones that have the bolt in cradle
-
slot the bottom A-arm frame wholes inward then weld up the access of the original whole grind to look unaltered then use an ofset upper A-arm shaft also weld up the ball joint bolt wholes grind out...
-
crown vics would be because easy to find not many of the others left to use
-
they are 8.8 rears also they have an aluminum bolt in front cradle and rack-n-pinion steering not sure about rear suspension but Lincoln Towncars are the same
-
They work great large opening and not choked down on the leftside ones, they are straight castings
-
use a 351 windsor try to set the engine as far back as you can,
-
that is so true God is being pushed out of everything He has been a part of even out of some churches. It is time we all take everything back that satan has stolen from us and the things that was...
-
http://www.youtube.com/watch?v=W49H4UYClCM this song tells it all God help our nation
All times are GMT -5. The time now is 12:28 PM.