-
9'' rear end
I have a 9'' floater rear end. Will i need to put in the tube seals in and pack bearings or can i just fill the tubes and pumpkin up to the fill hole for the bearings to get oiled
-
seals and grease.
The point of the R/E grease is to keep the gears lubed. If you try to use oil on the lr and are on a high speed track or a track you are always turning the oil may never make it back over to the LR bearing cause of the g forces.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 02:37 AM.
Bookmarks