no forward coming off

[cullen17racing]

i would definatly run a steeper pull bar, i personally run a 23" biscuit bar and it is mounted fairly steep. secondly the rru bar needs to go down, not up. this will have little affect on the entry and middle but will give you a throttle push. has never let me down. if it is extremely dry i will switch my lr lower bar to a 2" longer bar at same angle as the short and that way the birdcage build timing quicker and more bite. i'm not a genius but these have worked for me.

[Tnorton14]

Ran the car at two local shows this past weekend...wow did putting more angle in the pullbar work I had just the right amount of bite the car was so much easier to drive! And i even moved forward through some cars! With this being my second full season in a ump mod I need any and all help I can get but these suggestions were all taken into consideration! The pullbar seemed to do the trick this weekend! I was very happy with the car! Thank you

[DaveBauerSS6]

Tnorton14, congrats on the success and thank you for lettings us know what happened.
I learned alot from this thread.

[washeduptoo]

Glad things were better for you , best of luck.

[Tnorton14]

Thanks for all the help and thoughts guys!

[racin6mod]

how's it been the last couple weeks have you tried anything else ?

[Tnorton14]

Sorry i have not been on here latley....we have recently put a coil over on the rr and got rid of the eliminator...car is much better now i just need more seat time to get better at driving it....hopefully it all comes together by the end of the season

[dualdj1]

Glad to hear you're making progress. Keep it up!

[MiddleMan]

Did you need to buy a new rear end mount to steepen angle?

[Tnorton14]

No i had one hole left on the frame to go down so we went down on thr frame and reset pinion angle