I am trying to build my own upper contol arms for a metric dirt car. The stock locations can not be altered. I have been working on this for a few days now and was shooting for mounting them parallel to the center line of the chassi with 0 antidive. Finding that impossible to do.Have mocked things up a few different ways and have gotten about 1 1/2 camber gain per inch,1 1/2 caster gain with 3 inches travel and the control arm shaft is at 5 * upper hill in the front. Is this ok or am I going in the wrong direction? Also any advise for the left side would be helpfull so I am not shooting in the dark when doing that side.
John
Bookmarks