Results 1 to 10 of 10
  1. #1
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default Pistons Rockers Rods Cams Etc. Mullins stuff.

    2 Mullins flat tappet .600 lift cams for 3.75 stroke crank. ran very little. 218.00 New. Asking 100.00 each
    SBC Bowtie victor jr #2977 Cleaned up ports. 300.00 New. Asking 150.00
    SBC Pro Gram main caps. 350 journal #SB350CFS4. 235.00 New. Asking 115.00
    SBC 6in Eagle ESP H Beam rods. Arp 2000 bolts 2.1 journal. New 550.00. Asking 325.00 Very little run time.
    SBC Cower 1.6 Rockers with poly locks from mullins. New 430.00 Asking 325.00 8 nights on them.
    SBC Harland sharp 1.6 rockers with poly locks and girdle. New 400.00 Asking 200.00
    SBC CV Products steel timing cover. New 25.00. Asking 15.00 Like new.
    SBC JE #181938 Flat top pistons for 6in rod 3.75 stroke crank 4.125 bore 418 grams. New 750.00 never ran 700.00
    Stealth 4412 gas carb. Fresh never ran. New 700.00 Asking 375.00
    Used RJS belts. Black. 50.00

    I am located in NW Illinois. Buyer pays shipping. Txt or call 815-five41-381three 8am-8pm
    Last edited by Diggindirt 13; 01-27-2014 at 09:52 AM.

  2. #2
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default

    Btt.................

  3. #3
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default

    Btt........ really good parts. Very little use. Switched classes. Don't have a use for this stuff..

  4. #4
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default

    Tttttttttttttttt

  5. #5
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default

    Belts sold. Cower rockers pending. Need to move these parts. Save some $$$$. All is as close to new as it gets.. will send pics

  6. #6
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default

    Crower rockers, CV timing cover, Stealth carb sold. Thanks guys!! All good parts.. Makin deals! Get it before its gone!!

  7. #7
    Join Date
    May 2007
    Location
    tulsa america
    Posts
    2,687

    Default

    mullins cams come w/ cam card or lifters?

  8. #8
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default

    Mullins does not give out cam cards.. I do have the matching lifters for one cam for an extra 50 dollars. I do know they are 600 lift and they really had smooth power.. great cams.

  9. #9
    Join Date
    Apr 2009
    Location
    Near Freeport IL
    Posts
    70

    Default

    Back to the top it goes!!

  10. #10
    Join Date
    Jan 2013
    Location
    Hamilton Co 4H Fairgrounds,Noblesville,IN
    Posts
    185

    Default

    Discover what veteran racers have known for years. Sell your unused racing parts that have set on the shelf for more than one year for fair market value and buy some parts that you can use in the upcoming year at one place,one time without all the hassles of annoying phone calls,shipping,tire kickers,etc. http://www.facebook....erracersauction 3/1/2014 Hamilton Co 4H Fairgrounds, Noblesville, In Contact us ASAP to reserve your lot numbers or Swap Meet Booth Lot numbers are limited so act today 317-443-0668, jwauctioneer@frontier.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 01:39 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.