It has 6" rods and hyper flat top pistons, .600 .600 lift roller cam, roller lifters, roller tip rockers, victor Jr. high rise aluminum intake and a 750 Holley hp double pumper carb. I'm wanting to use a set of Dart cast iron 230's 64cc 205/160 valve angle plug heads. Would this enough engine to compete on a 1/4 to 3/8ths track? The car is a 3000lb. street stock. I figure i will competing against some 400's and wondering do i need to go with the bigger cubes to keep up. Thanks
Read more: http://thedirtforum.boards.net/threa...#ixzz3MlGUsJUQ
Bookmarks