If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
We have a JC-3 chassis built by James Cline in 2009. It is based off of a GRT and all the GRT parts will work. It is rolling now but would just sell the chassis. Let me know if you are interested or have any questions.
We have a JC-3 chassis built by James Cline in 2009. It is based off of a GRT and all the GRT parts will work. It is rolling now but would just sell the chassis. Let me know if you are interested or have any questions.
I have a 2002 GRT square tube roller with less than 20 nights on car since new. This car has the wide front end. The rearend and rack-n-pinion have more races than that on them, but were rebuilt and have less than a season on them too. This was one of Buck Simmons cars when he drove for Gerald Voyles. Has magesium hubs, new brake calipers, magnesium center section Winters rearend, midplate, 32 gallon fuel cell, adjustable uppers, shifter, gauges, brake and clutch pedals/master cylinders, new lowers, new spindles and Afco M2 shocks. Will include a spare set of brand new lowers and used straight spindles. Will throw in a seat if it will fit ya! Add your engine, trans, bellhousing and go race for $6500.00
Comment