Tweet
8 3/8 ring gear - 10 bolt
12 Rib side bells, increases cooling capacity and strength
Heat treated lower shaft
Gear cover with internal bearing retainers
Aluminum 31 spline spool
Internal tube seals, aluminum
Tube and bell lock nut assembley
Tubes have 2" snouts
Accepts full size quick change pinion plates
Pull bar tower with multiple positions for pull bar and 90/10 shock
62" with 2" off set, steel tubes
Extra (new) Gear cover gasket
15 sets of gears
4.77 4.86 4.86 4.93 5.10 5.20 5.29 5.43 5.54 5.67 5.77 5.80 5.94 6.05(new) 6.14(new)
most gears have very little use, or no use at all.
This is a great low drag quick change rear-end. I do have another set of steel tubes with 2 1/2" snouts. I ran this q.c. for three seasons, so it only has 36 or less nights on it. Tubes were changed when i switched hubs so they have even less time on them. I have multiple pics of q.c. and all the gears. I ran this rear-end in a UMP Modified. Winters rates this rear-end for 500hp and 3000lbs. I had over 500hp and wieghed 2400lbs. No problems.
$1500 989-621-4304
I have pics of quick change and all gears as it sits right now.
12 Rib side bells, increases cooling capacity and strength
Heat treated lower shaft
Gear cover with internal bearing retainers
Aluminum 31 spline spool
Internal tube seals, aluminum
Tube and bell lock nut assembley
Tubes have 2" snouts
Accepts full size quick change pinion plates
Pull bar tower with multiple positions for pull bar and 90/10 shock
62" with 2" off set, steel tubes
Extra (new) Gear cover gasket
15 sets of gears
4.77 4.86 4.86 4.93 5.10 5.20 5.29 5.43 5.54 5.67 5.77 5.80 5.94 6.05(new) 6.14(new)
most gears have very little use, or no use at all.
This is a great low drag quick change rear-end. I do have another set of steel tubes with 2 1/2" snouts. I ran this q.c. for three seasons, so it only has 36 or less nights on it. Tubes were changed when i switched hubs so they have even less time on them. I have multiple pics of q.c. and all the gears. I ran this rear-end in a UMP Modified. Winters rates this rear-end for 500hp and 3000lbs. I had over 500hp and wieghed 2400lbs. No problems.
$1500 989-621-4304
I have pics of quick change and all gears as it sits right now.
Comment