Dodge 360 Magnum Race Motor

[Shotgun63]

Specifications:
• Built with all-new components
• New Magnum Big Valve Cylinder Heads
• Mopar Performance Cast Aluminum Valve Covers
• High-Strength Stainless Steel Valves -- 2.02" intake and 1.62" exhaust
• Heavy-Duty Valve Springs
• Hydraulic Roller Camshaft -- 288°/292° duration, 0.501"/0.513" lift
• Pistons -- 9.0:1 compression ratio
• Single Plane, M1® 4-bbl Aluminum Intake Manifold -- includes bosses for MPI conversion
(taller than stock -- check hood clearance)
• Double Roller Timing Chain and Sprockets
• Canton double kick out race pan with baffles
• Mopar Performance Electronic Ignition Kit with Distributor
shoenfiled header
high flow fuel pump
power master starter
steel bell housing
hyd trhow out bearing w/ quick disconnect
5 1/2 inch triple disk quarter master clutch
360 Magnum Crate Engine -- 410 Horsepower, 420 ft.-lbs. Torque.
this motor is ready to go put on a carb and go run it... ask 4000.000 and thats a steal this motor cost me well over $10488.00 its no joke look them up
call Brandon for more info 919-426-7338 or PM

[Shotgun63]

BTT

Sealed Crate Engine

[Shotgun63]

Ive had alot of calls on this motor noone has been serious it's still available make an offer