06 4 bar roller to turnkey cheap 3000

[dirtnut10m]

here is a 06 overail roller to turnkey car is a dirteck 4 bar car comes with winters rearend with 4.86 full spool rocket bearing birdcages double sided pinion and frame mounts atl fuel cell with about 20 gallons fuel still in it winters hubs and outlaw brake calipers on all 4 corners weld 15x14x5 aluminum rims on all corners has remote batterry charging posts and remote batterry shut off kirkey 17" lightweight seat with cover camlock belts full 4 gauge panel with autometer 11 grand memory tach right front shutoff wilwood pedals with master cylinders msd 6al box and coil appelton power rack with integrated servo comes with driveshaft dynatech headers with mufflers radiator new body with 2 races md3 nose car looks as pictured 3000.00 also have a 12 race old set of adco m-1 double adjustable canister shocks full set of 5 with coilover kits and springs includes 2 7" fronts and 2-9" rears including a 9" rear for dummy shock rf has just been rebuilt by right foot performance asking 1000.00 whole set . also have a 12 race old complete brinn trans with reverse mount bellhousing starter flywheel and all 1000.00 have a turnkey 377 c.i sbc engine fresh 400 block eagle lightweight 350 crank and 6.125 rods mahle pistons pro topline aluminum heads with comp cams shaft roller rockers ultradyne .645-.645 roller cam solid with matching roller lifters msd dist eldebrock 2975 intake port matched to heads and carb fabricated valve covers engine made over 600 horsepower on dyno with 2bbl carb asking 4000.00 or will sale turnkey car for 8000.00 also have tons of extra parts for sale appelton rack 175.00 wilwood hubs with rotors and front covers and rear drive plates 150.00 all 4 , extra set of pro topline steel heads set up for roller cam 550.00 erson new grind roller cams and lifters 275.00 2 fresh air helmet blowers and hose and all 100.00 and all types of parts extra 10 weld 15x14x5 inche rims 5 beadlocks and 5 non with 14 or 16 hoosier d-21s and 1300 tires 1000.00 and whole lot more ask i may have it gotta go or going to ebay ty frank dirtnut10m@aol.com or 757-374-3159 thanks

[dirtnut10m]

forgot to add has woodward collapsiable steering shaft and rocket bearing birdcages all nice parts uses rocket rear set up and masterbuilt front set up

[dirtnut10m]

8000 turnkey has best of best adams water pump serpentine set up and tons more