sbc brodix headed stroker engine for trade

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dirtnut10m
    Senior Member
    • Aug 2009
    • 654

    #1

    sbc brodix headed stroker engine for trade

    here is a very stout sbc engine starts with a good 010 block 2 bolt main good caps punched .40 over line bored decked stroker clearenced bushed lifter bores got a callies compstar stealth 3.750 strroker crank 40 pounds matched to eagle lightweight h-beam rods and srp lightweight .40 over pistons internally balanced has brodix track 1 heads with 221 runners 60cc pockets 2.08-1.65 valves all good 1.550 roller springs for a solid roller special ground cam .635-.647 lift port matched to a eldebrock 2925 intake msd billet dist 85551 with bronze gear true roller double timing chain eldebrock aluminum water pump baker high flow fuel pump for gas holley carb with new proform center section just built 0- races flows 900 cfm. fuel log aluminum cv products 2" carb spacer fabricated valve covers aluminum roller rockers and comp double bar stud girdle cv products 8 quart double kick pan wix oil filter motor is complete ready to drop in and run all i am keeping is power steering set up pulleys and fan looking to trade for a legal engine for new rules this motor in my car with fluid filled gauges holds about 10-11 pounds of fuel pressure and 72 pounds oil pressure at a idle so it is not worn out . engine i need for my rules is flat top pistons solid roller cam steel heads can trade straight out or ?? any questions or more pictures email dirtnut10m@aol.com or 757-374-3159 or 757-465-2147 thanks frank
  • dirtnut10m
    Senior Member
    • Aug 2009
    • 654

    #2
    back to top

    Comment

    • noral54
      Senior Member
      • Jan 2009
      • 222

      #3
      if its in your car could i here it run before buying it

      Comment

      • dirtnut10m
        Senior Member
        • Aug 2009
        • 654

        #4
        yes as soon as i get my new flywheel and starter in

        Comment

        • dirtnut10m
          Senior Member
          • Aug 2009
          • 654

          #5
          back to top

          Comment

          • noral54
            Senior Member
            • Jan 2009
            • 222

            #6
            let me know ill stop over ..very intrested

            Comment

            • dirtnut10m
              Senior Member
              • Aug 2009
              • 654

              #7
              if you live close bring brinn flywheel we can bolt it on and you can hear it run where are you from ??

              Comment

              • noral54
                Senior Member
                • Jan 2009
                • 222

                #8
                about 30 miles south of chesapeake .whats a good time 4 u

                Comment

                • dirtnut10m
                  Senior Member
                  • Aug 2009
                  • 654

                  #9
                  you live in moyock nc or nc ?? who is this and anytime after 8 or 9 a.m thanks frank

                  Comment

                  • dirtnut10m
                    Senior Member
                    • Aug 2009
                    • 654

                    #10
                    thought so no show or call

                    Comment

                    • noral54
                      Senior Member
                      • Jan 2009
                      • 222

                      #11
                      christ give me time just got your return ,,been workin how about monday some time its my day off?

                      Comment

                      Working...
                      X