very nice 358 aluminum headed sbc cheap

[indian outlaw]

for sale or trade 358 c.i sbc 350 punched .40 over bored line bored deburred fitted with a 46.5 pound steel crank crower 6.0 i beam rods manely 2 valve relief flat top pistons set of 867 pontiac aluminum heads 2.05-1.65 stainless valves 1.5-1.6 roller rocker arms bo-laws stud girdle special ground small diameter cam holley high volume fuel pump, stewart stage three water pump eldebrock victor jr intake complete minus dist and carb can hear run before i pull it holds 80 pounds oil pressure at idle only run wix filters and brad penn oil in it asking 4500.00 or will trade 757-374-3159 dirtnut10m@aol.com for any trades or offers engine made 607 horsepower and 634 torque on gas with 600 4 barrell carb

[indian outlaw]

4000.00 o.b.o minus dist and carb can send video of engine running thru dirtnut10m@aol.com thanks

[noral54]

are they spread port heads ? what degree are they?

[noral54]

how about a trade for a 604 crate motor

[indian outlaw]

they are both spread port or standard headers

[noral54]

frank are the heads spread ports would you consider trade for 604 crate motor?

[indian outlaw]

said right above here they are spreadport or standard they have bolt holes either way . and might consider trade for 604 crate what all comes with it ? how old ? thanks

[kevpow]

motor

Frank, they are asking if the HEADS are spreadport, not the Headers!!!

[perfconn]

Pontiac 867 heads are standard exhaust ports not spread ports.The twin bolt patterns are for Stahl pattern and standard sbc pattern.

[indian outlaw]

exactly and i run standard headers but heads are set up with dual header bolt pattern i guess i was trying to say sorry for confusion

[noral54]

it was fresh 10 races ago comes with every thing from pan to carb