Looking for a good deal on 415-430 aluminum engine 15* or better heads

[WENDEL ROCKET]

Looking for a good deal on 415-430 aluminum engine 15* or better heads. thanks

[perfconn]

#1- 13*-Originally a Clements engine-350 mains 2 inch rods-Brodix block-Dart heads-1.75-1.70 Jesel rockers-Jesel. 875 lifters-King crank-Crower Maxi light rods-Racetec pistons-2 piece intake-50mm cam-ATI balancer-Edelbrock waterpump-CV billet fuelpump-MSD distributor-fabricated aluminum oilpan w/3#12 pickups-fabricated valve covers-pullys-lots of new parts-14.43 compression.

#2- 15* New HVH Brodix topend-Dart block-King crank-Carrillo rods-350 mains 2 inch rods- Racetec pistons-1.85-1.80 Jesel rockers-50mm cam-.903 Crower lifters-MSD crank trigger-MSD distributor-ATI-RCR waterpump-CV billet fuelpump-fabricated valve coversw/oilers-fabricated aluminum oilpan w/3 #12 pickups-1 piece intake-pullys-lots of new parts-14.00 compression

Both of these engines are 430ci.These engines are fresh but not dynoed yet.Engines have new valve springs,new retainers,new pistons,new rings,new bearings and some have other new parts.The 15* has a whole new topend and the 13* has new lifters.
You can buy either one of the engines for $13,000.00
If you have any questions you can email me at terry.marciaburnett@gmail.com or call me at 1-865-567-6943 no pictures right now but will have some later.

[go2fast]

Have one dart block 4.155 bore dart heads 13deg new callies xl crank 3.875 crower max rods 6.000 comp cam 55mm .903 lifters piston rings 90 laps 20,000.00