434 Chevy All Aluminum 400 laps on rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Meier20
    Senior Member
    • Nov 2007
    • 268

    #1

    434 Chevy All Aluminum 400 laps on rebuild

    Shepherd Engine Development
    434 ci
    Freshened and updated 4-14 parts with a (n) after them were replaced new in April.

    Set up for 5 stage dry sump system

    HVH CNC ported 15 deg heads, with matching intake

    Dart Aluminum block
    o 4.170 bore
    o 50mm cam bore
    o .903 lifter diam.

    Lunati Pro series crankshaft
    o 4.00 stroke
    o 350 main
    o 2.100 rod pins

    Manley dirt series 300m rods (n)
    o 5.850 long
    o .927 pin
    o ARP 625 bolts 7/16

    Custom CP pistons w/DLC pins (n), Total seal rings, T&D rockers, 7/16 pushrods (n), BAM .904 lifters (n), Coated Ti valves (n), ISKY tool room springs(n), Fab covers with spring oilers (n), Champ pans aluminum oil pan (n), MSD distributor, Scotts plug wires (n), Fragola plumbing (n), CV Billet fuel pump, Calico coated Clevite rod and main bearings, Cloyes timing set.

    Roughly 400 laps since complete rebuild

    Comes with
    -Stealth 750 Carb (New in 2014)
    -Beyea Tri Y Headers (New in 2014)

    $16,500.00
    WILL SHIP
    Contact 319-325-6024
Working...
X