Tweet
Whitewater Valley Racing Engines is back and better than ever! After taking a year off to focus on my family and race team I am back to doing what I do best, building high quality street stock/pure stock engines that will not break your budget and will get you to the front! I look forward to building many more engines and getting more of you to the front where you belong!
Up for sale is a small block chevy 362 cubic inch beast! The specs on this engine are as follows:
Chevy 350 four bolt main bored .060 over, hot tanked, magnafluxed, line honed, torque plate hones, new durabond cam bearings and brass freeze plugs
New Scat 9000 Nodular Steel Crankshaft 3.48 stroke
New Eagle S/R full floating 4340 forged 5.7 rods
New TRW forged .200 dome .060 over pistons
New Melling HV oil pump, steel oil pump sleeve
New Speedway 8 quart racing oil pan
New PRC #8 cam and lifter set. 531 lift int. 542 lift exh. Dur @.050 248 int 251 exh. 106 lobe sep
New Cloyes double roller timing set
New timing cover, timing tab, lightweight harmonic balancer, 153 tooth flexplate
New high strength pro comp push rods
The heads make this engine! These are a nice set of 461 double hump heads that have been milled, magnafluxed, cleaned, three angle valve job 1.94 int. 150 exh. Extensive port work done on this set of heads! Intake runners have been pocket ported and flow 180 cc. Exhaust ports have been ported as well. 3/8 screw in studs and guidplates with brand new 4340 steel 1.6 length roller rocker arms and .600 lift valve springs with new retainers, 10 degree locks, new valve seats and bronze guides. Valve lift is increased with these rocker arms to .566 int. .578 exh. There is a huge amount invested in labor and parts on these heads alone!
Used Weiland Team G aluminum intake in like new condition
New Speedway Valve covers and breathers
New Aluminum high flow long water pump
New aluminum crank and water pump pulleys
New High Line HEI distributor with 65K volt coil
All hardware on this engine is brand new, no used bolts or studs anywhere! Felpro gasket set.
This engine has the best of everything on it and is ready to get you to the front! Don’t hesitate; if you’re looking for a new engine then do not let this deal pass you by! If you don’t buy it the competition might! I am letting this one go for $3450! You will not find this much engine for under $3500 anywhere with brand new parts. Once again this is a fresh, never fired brand new engine with brand new parts. Give me a call or shoot me an email and come and get your new engine. Thanks for looking and as always if you’re looking for something different let me know, I do build to order.
Shelby Moles, Whitewater Valley Racing Engines
Phone 765-265-6438
Email smoles15@yahoo.com
Up for sale is a small block chevy 362 cubic inch beast! The specs on this engine are as follows:
Chevy 350 four bolt main bored .060 over, hot tanked, magnafluxed, line honed, torque plate hones, new durabond cam bearings and brass freeze plugs
New Scat 9000 Nodular Steel Crankshaft 3.48 stroke
New Eagle S/R full floating 4340 forged 5.7 rods
New TRW forged .200 dome .060 over pistons
New Melling HV oil pump, steel oil pump sleeve
New Speedway 8 quart racing oil pan
New PRC #8 cam and lifter set. 531 lift int. 542 lift exh. Dur @.050 248 int 251 exh. 106 lobe sep
New Cloyes double roller timing set
New timing cover, timing tab, lightweight harmonic balancer, 153 tooth flexplate
New high strength pro comp push rods
The heads make this engine! These are a nice set of 461 double hump heads that have been milled, magnafluxed, cleaned, three angle valve job 1.94 int. 150 exh. Extensive port work done on this set of heads! Intake runners have been pocket ported and flow 180 cc. Exhaust ports have been ported as well. 3/8 screw in studs and guidplates with brand new 4340 steel 1.6 length roller rocker arms and .600 lift valve springs with new retainers, 10 degree locks, new valve seats and bronze guides. Valve lift is increased with these rocker arms to .566 int. .578 exh. There is a huge amount invested in labor and parts on these heads alone!
Used Weiland Team G aluminum intake in like new condition
New Speedway Valve covers and breathers
New Aluminum high flow long water pump
New aluminum crank and water pump pulleys
New High Line HEI distributor with 65K volt coil
All hardware on this engine is brand new, no used bolts or studs anywhere! Felpro gasket set.
This engine has the best of everything on it and is ready to get you to the front! Don’t hesitate; if you’re looking for a new engine then do not let this deal pass you by! If you don’t buy it the competition might! I am letting this one go for $3450! You will not find this much engine for under $3500 anywhere with brand new parts. Once again this is a fresh, never fired brand new engine with brand new parts. Give me a call or shoot me an email and come and get your new engine. Thanks for looking and as always if you’re looking for something different let me know, I do build to order.
Shelby Moles, Whitewater Valley Racing Engines
Phone 765-265-6438
Email smoles15@yahoo.com
Comment