Tweet
I had it freshened up 3 years ago and only 3 laps on motor. Has not been raced. the block has eagle rods matched to a eagle 48lb steel crank. 5.7 rods. crane solid lift cam, 550 lift 290 duration if I recall correctly. Wiseco flatop pistons. It has been line bored and decked to 0 deck hieght with flat top pistons. Also its been polished and all the oil reutrns also. Heads are 300 heads, big race strainless steel valves and springs that match the cam. Has fuller roller rockers, guide plates and gurdles. They have been undercover polished and ported to match. It has a Hei distributer and MSD ignition module with rev limiter. Big wires. course it has racing power steering pump, and aluminum water pump. Carb is a holler 1850, dual metering plugs and a full fuel rail. It has a racing high flow fuel pump. Can remember the name. with 3/4 inch fuel line ran to the fuel cell where there is a huge racing fuel filter with a replaceable element. Car has a large recall tac. bead locks all the way around. with some extras ford 9 inch with 6.33 gears Lightweight 13lb aluminum flywheel and corvette clutch and hyrdraulic throw out bearing. You cannot build it all for 8. car.... its a solid car otherwise make offer. It needs a new home. Location Summerfield Nc... just above greensboro nc. j.gibson4@hotmail.com or3362155560