Tweet
Have a set of 461, 1.96 intake, double humps. On a I-stock car right now, but ill pull off when ever someone wants them, engine wont be run with them on it.
They have 1.45 double valve springs in them, chrome moly retainers and locks, guideplates and arp screw in studs. The pushrods holes were opened up for a high lift cam, and the combustion chambers are down to around 60cc.
All the pricy machine work has been done to these!! around 600 bucks was invested into these heads, but rules change and I cant run them! Ready to bolt on and go racing!
Will take offers, but not giving them away! Live in kansas, but will arrange shipping if someone wants them! Asking $375
They have 1.45 double valve springs in them, chrome moly retainers and locks, guideplates and arp screw in studs. The pushrods holes were opened up for a high lift cam, and the combustion chambers are down to around 60cc.
All the pricy machine work has been done to these!! around 600 bucks was invested into these heads, but rules change and I cant run them! Ready to bolt on and go racing!
Will take offers, but not giving them away! Live in kansas, but will arrange shipping if someone wants them! Asking $375
Comment