Tweet
1984 toyota celica
Car is straight no major damage, cause it ran at the front
Cast and Camber plates on car (former SCCA Racing Car)
22re motor with nippon racing head
20r California custom head ported and polished never ran ($1800.00) SWEET
knife edged crank
LC engineering circle track pan and header
Wiesco flat top pistons
Toga racing pump and bearings
LC engineering 12 lb billet steel flywheel
Stainless steel valves will also fit the California custom head
Holley 500
LC engineering adjustible cam gear
Web Racing cam + extra one
Chevy HEI Distributor (Custom made )
Extra 1984 celica stipped with pipe cage
Racing trailer with winch and front storage
Two extra stock rotating assemblies
extra 60 over pistons and rings
Hoosier 13" dirt boss tires like new with 2 " Backspace on wheels
4 extra 3rd members in various ratios currently a 3.73
Manual scales and camber gage
car is scaled and ready
and a bunch of other racing equipment every thing I got
Selling everything and going fishing
E-Mail and I will send Photos
Located in Paris Texas
This car is a front runner and with the ported and polished head on it can run with anything on the track
Contact Henry Shaw @ 903-732-3327 or e-mail @ lonechevy@sbcglobal.net
Car is straight no major damage, cause it ran at the front
Cast and Camber plates on car (former SCCA Racing Car)
22re motor with nippon racing head
20r California custom head ported and polished never ran ($1800.00) SWEET
knife edged crank
LC engineering circle track pan and header
Wiesco flat top pistons
Toga racing pump and bearings
LC engineering 12 lb billet steel flywheel
Stainless steel valves will also fit the California custom head
Holley 500
LC engineering adjustible cam gear
Web Racing cam + extra one
Chevy HEI Distributor (Custom made )
Extra 1984 celica stipped with pipe cage
Racing trailer with winch and front storage
Two extra stock rotating assemblies
extra 60 over pistons and rings
Hoosier 13" dirt boss tires like new with 2 " Backspace on wheels
4 extra 3rd members in various ratios currently a 3.73
Manual scales and camber gage
car is scaled and ready
and a bunch of other racing equipment every thing I got
Selling everything and going fishing
E-Mail and I will send Photos
Located in Paris Texas
This car is a front runner and with the ported and polished head on it can run with anything on the track
Contact Henry Shaw @ 903-732-3327 or e-mail @ lonechevy@sbcglobal.net