2.3 Roller Head

[roundtrack]

2.3 Roller Head - Crane Cam, ported/polished, oval port/open chamber, cut to the intake bolts, Ferrera stock size swirl polished intake valves and SS coated exhaust valves, oil return screens, welded towers and line bored, new cam bearings, valve guide seals and camshaft seal. Adjust valves and ready to race. Also has Esslinger square tooth cam gear on it. Will also throw in fuel injected intake with injector holes plugged. Put on plate and race ready. $625 for all. 615-473-4847 Thanks

[roundtrack]

BTT - Still available will take $550 for head and intake. I also have a oval port, open chamber Hydraulic head complete with adjustable cam gear. Needs lifters and cam shaft seal. Will take $825 for roller head and hyd head with adj cam gears and fuel injected intake. Can drive and meet if not too far. Have had several offers and even promise of "check in the mail". Will work with anybody if serious. Thanks

[Wrencherer]

What are the specs on the cam in the roller head?

[roundtrack]

I will have to give you the numbers off the cam when I get back to shop.