Tweet
(6) good 2.3 blocks. $50 ea
(1) block race ready bored .30 over SOLD
(4) cranks $25 ea
(2) front pans with baffles and tray $125ea
*SOLD* Esslinger Race rear sump pan with crank scraper with pickup tube $200
(1) 2.0 block/head with rear sump pan $100
A few transmissions $100 ea
Esslinger SVO Alum head 12.5 compression (head needs re-assembled)
Esslinger Port matched intake w/Holley 500 (Earl Parker Carburation Stage III)
Esslinger 1 steel billet cam .620 lift w/cam card
Esslinger 1 steel billet ARCA cam .658 lift w/cam card
New valve springs, roller rockers, valves, titanium retainers.
$2000 shipped for the head and your choice of cam with the port matched intake w/o carb.
2 sets of ARP head studs. $50 ea set
1 set of ARP main stud. $50
1 set of Chromoly main studs $40
Lots of new pistons rings, rod and main bearing 2.3 and some 2.0 ALL namebrand ACL/Clevite $150 for the lot.
New crower 5.7 rods and like new 5.7 wiseco .30 over pistons $300
1 set of like new manley 5.7 rods. $185
2 .40 over wiesco pistons for 5.7 rods. $40 shipped
(2) Complete Goldstar 7# flywheel/clutch assembly’s race ready 23spline $450 shipped
(1) Billet Esslinger Auxillury Shafts w/ changeable gears $150
Probably more just have not got everything out. These are the big ticket items. I want to sell everything together. I have all of Mission machines build sheets for reference that will go with it too. From San Antonio, Tx
SOLD -- I also have a Esslinger destroker knife edge crank 2.3 to 2.0 that was $1700 new that I will sell separate for $350. Stroke is 2.750 and must be used in a pre-89 large journal block. STD or .010 main and rods I cannot remember. With .030 over pistons the final cc will be 2057.
9" rear end pumpkins / gears and all the 8" rear end pumpkins with 5 different gear ratios.
Would like to sell everything at once but the aluminum head will be the last to go.
We ran the best parts available!
Also have a pinto less motor that ran 16.7 in Kyle, TX asphalt.
PM (prefer pm) I am school teacher and do not have alot of free time or call with any questions on parts and price. I will take pics of the requested items.
PAYPAL ADD 4%.
Thanks
Bryce
210-827-4430
Located in Devine, Tx 78016
(1) block race ready bored .30 over SOLD
(4) cranks $25 ea
(2) front pans with baffles and tray $125ea
*SOLD* Esslinger Race rear sump pan with crank scraper with pickup tube $200
(1) 2.0 block/head with rear sump pan $100
A few transmissions $100 ea
Esslinger SVO Alum head 12.5 compression (head needs re-assembled)
Esslinger Port matched intake w/Holley 500 (Earl Parker Carburation Stage III)
Esslinger 1 steel billet cam .620 lift w/cam card
Esslinger 1 steel billet ARCA cam .658 lift w/cam card
New valve springs, roller rockers, valves, titanium retainers.
$2000 shipped for the head and your choice of cam with the port matched intake w/o carb.
2 sets of ARP head studs. $50 ea set
1 set of ARP main stud. $50
1 set of Chromoly main studs $40
Lots of new pistons rings, rod and main bearing 2.3 and some 2.0 ALL namebrand ACL/Clevite $150 for the lot.
New crower 5.7 rods and like new 5.7 wiseco .30 over pistons $300
1 set of like new manley 5.7 rods. $185
2 .40 over wiesco pistons for 5.7 rods. $40 shipped
(2) Complete Goldstar 7# flywheel/clutch assembly’s race ready 23spline $450 shipped
(1) Billet Esslinger Auxillury Shafts w/ changeable gears $150
Probably more just have not got everything out. These are the big ticket items. I want to sell everything together. I have all of Mission machines build sheets for reference that will go with it too. From San Antonio, Tx
SOLD -- I also have a Esslinger destroker knife edge crank 2.3 to 2.0 that was $1700 new that I will sell separate for $350. Stroke is 2.750 and must be used in a pre-89 large journal block. STD or .010 main and rods I cannot remember. With .030 over pistons the final cc will be 2057.
9" rear end pumpkins / gears and all the 8" rear end pumpkins with 5 different gear ratios.
Would like to sell everything at once but the aluminum head will be the last to go.
We ran the best parts available!
Also have a pinto less motor that ran 16.7 in Kyle, TX asphalt.
PM (prefer pm) I am school teacher and do not have alot of free time or call with any questions on parts and price. I will take pics of the requested items.
PAYPAL ADD 4%.
Thanks
Bryce
210-827-4430
Located in Devine, Tx 78016
Comment