Tweet
Selling a complete Ram Coupler and flex plate for a Ford 2.0L (1907-74 model engine, old style). The transmission input is a 23-spline cone used with a OEM Ford 4-speed transmission. This coupler is used with the friction cone replaced several times over several years of use. Only 1 season on current friction cone. Flywheel bolts are included as shown. This flex-plate was only used 1 season and is in good condition, no wear on the ring gear teeth. This is being sold as is with buyer paying for shipping. Addition pictures can be sent as requested and please ask questions if more information is needed. $300 or Best Offer.
Also have a Weiand intake manifold 7274 casting number, for a Ford 2.0L (2000cc) 4-cylinder OHV engine. On this intake is a phenolic 4-barrel to 2 barrel adapter set up for a holley 2-barrel carburator. This intake has been port matched to the felpro gasket set for this style intake. The plenum has been knife edged for improved flow. This intake is designed for equal length runners for improved performance. The weld marks on the top of the runners were to add material due to the port matching to the gasket. This intake was used on a circle track race car with no issues. This is sold as is with buyer paying for shipping. $100 or Best Offer
Can be contacted by cell at 812-470-0063
Lance
Pictures not uploading correctly. Will try to add but can send by request.
Also have a Weiand intake manifold 7274 casting number, for a Ford 2.0L (2000cc) 4-cylinder OHV engine. On this intake is a phenolic 4-barrel to 2 barrel adapter set up for a holley 2-barrel carburator. This intake has been port matched to the felpro gasket set for this style intake. The plenum has been knife edged for improved flow. This intake is designed for equal length runners for improved performance. The weld marks on the top of the runners were to add material due to the port matching to the gasket. This intake was used on a circle track race car with no issues. This is sold as is with buyer paying for shipping. $100 or Best Offer
Can be contacted by cell at 812-470-0063
Lance
Pictures not uploading correctly. Will try to add but can send by request.
Comment