Tweet
Guys heres the deal. After selling on this forum and several others for the last 8-9 years I am getting out of the parts business. I am doing this as I have taken on weekly promotion of a local racetrack. I want all the parts left in my shop gone by April 1st barring my personal items. I am going to do this by selling on this forum and others as well as absolute auctions on Ebay with starting bids of $0.99 and no reserves. The stuff is going to sell!! If your interested and serious please call,text or pm. Please refrain from requesting pics of every little item. I DO NOT SELL JUNK!!
NEW Sweet collapsable steering column. Never ran and brand new with the steering coupler. Lists for $275+. I will take $235
NEW Fluidyne deck mount oil cooler. It has been bolted up to the car but never had any liquids in it or even had a line attached as I switched set-ups before running. Its in the original box. It was $289 new plus tax and shipping. I will take $200 shipped
NEW Fastshaft 28.75" chromoly steel driveshaft. This is new with long yoke. Its setup for a SkyRocket with a Brinn. It was $345 new and never used as I sold car before using. 6lbs lighter than standard shaft. Asking $250 SOLD PENDING PAYMENT
New Fastshaft 29.75" steel driveshaft. New in package. No yoke. Its $195 new. Asking $125
8 good used Fastshafts. They range from 27.5" to 31". Some have yokes others dont. Good used shape. Prices range from $65-145
Stealth 750 with 850 baseplate ultralite composite carb. Its a gas carb. Its also just been gone threw and has no laps on it. Asking $825
Jim Evans racing 4412 2 barrel carb. This carb has 4 nites on it since it was freshened. It makes excellent smooth power. Has billet metering blocks. Asking $375
GM Bowtie block. Needs to go to 4.165 bore. Has 350 mains. No sleeves. Its a former Arca block and will need remote filter mount but is setup for wet sump oiling. $850 This is a consignment
Crower 3.875 stroke 400 main small journal (2.00) rod pin 48 pound crank. This is a genuine billet crower crank and has a fresh polish. Asking $375 This is a consignment
32 gallon ATL fuel cell. Its in nice used shape and has a used frame on it from a GRT latemodel. $275
32 Gallon jaz fuel cell. Its in decent used shape. $75
1 Engine shipping pod. This is basically new. I bought a new Mullins engine last year and they shipped it to me in this pod so its been used once. Its complete with engine mounts. They sell for $325 new. Will take $225
Pair of chevelle ump style lowers. They are used but straight and have balljoints and the spacers for hiems. Asking $175 for pair SOLD PENDING PAYMENT
2 complete Quarter Master ULGC reverse mount starter GM triple disc clutch setups. These are complete setups and include the bellhousings, starters, clutches, and throwout bearrings. Niether has been used for 2 years as the owner went to IMCA steel bellhousing setups. No cracks in the bells and disc are good starters have been bench tested. These are $1500+ new. Asking $550 for each setup
Quarter Master 153 tooth GM 2 disc clutch setup. Comes with clutch flywheel starter and magnesium bellhousing. No throwout bearring! Everything is in nice shape. Asking $425
Tilton GM 153 tooth Magnesium bellhousing. Its just the bell. $175
Tilton Ford magnesium bellhousing for OEM flexplate with throwout bearring. Asking $225
Tilton Ford Magnesium bellhousing for oem flexplate. Just the bell. $150
GM cast bellhousing. It has cracked and been repaired at one time and ran with no further issue since. It is IMCA legal as it is a steel bell. $75
3 GM aluminum bellhousings. All good shape with no cracks or welds. $50 ea
3-2" offset Basset 5x5 beadlock wheels. In good shape. Asking $85ea
2-2" offset Aero 5x5 beadlock wheels. Both excellent. Asking $85ea
4" offset Basset chrome wheel. Its new and never had a tire on it. Asking $50
3 Used pullbars
1 Harris spring with biscuit. $85
Dual spring pullbar with both springs $75
Older style one way with spring. $50
2 Inner mud plugs for LR. They are for 4" offset. One is new other is slightly used. Asking $20 ea or $30 for both
Pair of billet aluminum lug pattern adapters. These are used to change your stock bolt pattern hubs from 4.5 or 4.75 to the 5x5 pattern. They also make your front end 2" wider. They sell new for $129. Asking $70
1 New OEM IMCA Chevelle lower a frame. Its new in the box. Asking $90
2 used Bowtie GM cast iron "marine" high rise intakes. Asking $175 for the one and $125 for other.
Power Plus Hurricane Intake (Edelbrock Super Victor 2925 copy) Its used but no damage. Asking $110
Edelbrock Torker intake $75
used stagger gauge $20
2 used sets of black simpson seat belts. $20ea
set of used black simpson belt pads $10
7 used Moroso foam prefilters for air cleaner $5 ea
4 used qc gear boxes. Asking $10 for all 4
1 qc gear storage container. It holds 8 sets of gears. Asking $20
used GM system 1 cleanable oil filter. Asking $35
New blue neck collar. Its the foam style with blue cover. Never out of plastic $20
New bead breaker. $20
Carb hats 1-cv, 1-willys, . Asking $5ea
2 jaz overflow tanks. Asking $10ea
6 NEW Napa gold 14x4" air filters. Its a sealed case. I switched to the r2c this year. $50 for the case
Hex steering wheel couplers. Asking $10ea
2 6 Blade fans. Asking $10ea
3 used throttle pedals. $10ea
2 used 1/2" sure seal for air cleaner bases. $5 ea
Lead that has been formed into ballast for racing purposes. Only have about 1100 lbs left as its been selling fast. Will sell for $1 per pound and ship up to 68 lbs at a time threw the USPS for $12.95 in shipping. Or will sell it in large lots for less. ALL SOLD PENDING PAYMENT
Many misc items like new in box MSD stuff, new boxes of rivits, new fuel pumps, fan and carb spacers, TONS of aeroquip lines and fittings, misc rocker arms, axles, axle tubes, and just lots more misc items i've aquired in my years of parts sales (there $1000's in just misc little stuff).
Like said above everything is going down the road asap. Call text or pm for more info. 815-990-8865
NEW Sweet collapsable steering column. Never ran and brand new with the steering coupler. Lists for $275+. I will take $235
NEW Fluidyne deck mount oil cooler. It has been bolted up to the car but never had any liquids in it or even had a line attached as I switched set-ups before running. Its in the original box. It was $289 new plus tax and shipping. I will take $200 shipped
NEW Fastshaft 28.75" chromoly steel driveshaft. This is new with long yoke. Its setup for a SkyRocket with a Brinn. It was $345 new and never used as I sold car before using. 6lbs lighter than standard shaft. Asking $250 SOLD PENDING PAYMENT
New Fastshaft 29.75" steel driveshaft. New in package. No yoke. Its $195 new. Asking $125
8 good used Fastshafts. They range from 27.5" to 31". Some have yokes others dont. Good used shape. Prices range from $65-145
Stealth 750 with 850 baseplate ultralite composite carb. Its a gas carb. Its also just been gone threw and has no laps on it. Asking $825
Jim Evans racing 4412 2 barrel carb. This carb has 4 nites on it since it was freshened. It makes excellent smooth power. Has billet metering blocks. Asking $375
GM Bowtie block. Needs to go to 4.165 bore. Has 350 mains. No sleeves. Its a former Arca block and will need remote filter mount but is setup for wet sump oiling. $850 This is a consignment
Crower 3.875 stroke 400 main small journal (2.00) rod pin 48 pound crank. This is a genuine billet crower crank and has a fresh polish. Asking $375 This is a consignment
32 gallon ATL fuel cell. Its in nice used shape and has a used frame on it from a GRT latemodel. $275
32 Gallon jaz fuel cell. Its in decent used shape. $75
1 Engine shipping pod. This is basically new. I bought a new Mullins engine last year and they shipped it to me in this pod so its been used once. Its complete with engine mounts. They sell for $325 new. Will take $225
Pair of chevelle ump style lowers. They are used but straight and have balljoints and the spacers for hiems. Asking $175 for pair SOLD PENDING PAYMENT
2 complete Quarter Master ULGC reverse mount starter GM triple disc clutch setups. These are complete setups and include the bellhousings, starters, clutches, and throwout bearrings. Niether has been used for 2 years as the owner went to IMCA steel bellhousing setups. No cracks in the bells and disc are good starters have been bench tested. These are $1500+ new. Asking $550 for each setup
Quarter Master 153 tooth GM 2 disc clutch setup. Comes with clutch flywheel starter and magnesium bellhousing. No throwout bearring! Everything is in nice shape. Asking $425
Tilton GM 153 tooth Magnesium bellhousing. Its just the bell. $175
Tilton Ford magnesium bellhousing for OEM flexplate with throwout bearring. Asking $225
Tilton Ford Magnesium bellhousing for oem flexplate. Just the bell. $150
GM cast bellhousing. It has cracked and been repaired at one time and ran with no further issue since. It is IMCA legal as it is a steel bell. $75
3 GM aluminum bellhousings. All good shape with no cracks or welds. $50 ea
3-2" offset Basset 5x5 beadlock wheels. In good shape. Asking $85ea
2-2" offset Aero 5x5 beadlock wheels. Both excellent. Asking $85ea
4" offset Basset chrome wheel. Its new and never had a tire on it. Asking $50
3 Used pullbars
1 Harris spring with biscuit. $85
Dual spring pullbar with both springs $75
Older style one way with spring. $50
2 Inner mud plugs for LR. They are for 4" offset. One is new other is slightly used. Asking $20 ea or $30 for both
Pair of billet aluminum lug pattern adapters. These are used to change your stock bolt pattern hubs from 4.5 or 4.75 to the 5x5 pattern. They also make your front end 2" wider. They sell new for $129. Asking $70
1 New OEM IMCA Chevelle lower a frame. Its new in the box. Asking $90
2 used Bowtie GM cast iron "marine" high rise intakes. Asking $175 for the one and $125 for other.
Power Plus Hurricane Intake (Edelbrock Super Victor 2925 copy) Its used but no damage. Asking $110
Edelbrock Torker intake $75
used stagger gauge $20
2 used sets of black simpson seat belts. $20ea
set of used black simpson belt pads $10
7 used Moroso foam prefilters for air cleaner $5 ea
4 used qc gear boxes. Asking $10 for all 4
1 qc gear storage container. It holds 8 sets of gears. Asking $20
used GM system 1 cleanable oil filter. Asking $35
New blue neck collar. Its the foam style with blue cover. Never out of plastic $20
New bead breaker. $20
Carb hats 1-cv, 1-willys, . Asking $5ea
2 jaz overflow tanks. Asking $10ea
6 NEW Napa gold 14x4" air filters. Its a sealed case. I switched to the r2c this year. $50 for the case
Hex steering wheel couplers. Asking $10ea
2 6 Blade fans. Asking $10ea
3 used throttle pedals. $10ea
2 used 1/2" sure seal for air cleaner bases. $5 ea
Lead that has been formed into ballast for racing purposes. Only have about 1100 lbs left as its been selling fast. Will sell for $1 per pound and ship up to 68 lbs at a time threw the USPS for $12.95 in shipping. Or will sell it in large lots for less. ALL SOLD PENDING PAYMENT
Many misc items like new in box MSD stuff, new boxes of rivits, new fuel pumps, fan and carb spacers, TONS of aeroquip lines and fittings, misc rocker arms, axles, axle tubes, and just lots more misc items i've aquired in my years of parts sales (there $1000's in just misc little stuff).
Like said above everything is going down the road asap. Call text or pm for more info. 815-990-8865
Comment