Tweet
I am rebuilding a Ford 358 based on a 69 Windsor block, i had previously ran it with a set of Roush World 200 Iron heads that had 2.02/1.60 valves 64cc combustion chambers, I want to get a set of aluminum heads that will bolt right on, allow me to use the Edelbrock Victor JR intake I have and the same headers that I used. I have found several sets of heads around but is seems like none are capable of using the big cam that I have. The lift is nearly .730. and of course the will be on an engine spinning more than 7500 rpm. If you have or no someone who may have a set please contact me on here.
Comment