Tweet
383 SBC built by Auto Rons....Dart Iron Eagle block 4.185, Brodix 10x 23 deg alum heads with titanium valves with matching edelbrock intake by Chapman, JE pistons, Magnum XL Callies Crank 3.48 stroke, Comp roller 50mm cam, Comp Elite ford lifter, T&D Shaft rockers, alum oil pan with oil heater, Comstar I beam rods 6.125, 25 nights since rebuilt, only 25 nights on crank, rods, pistons, cam and lifters. Needs a rear main seal(has a slow leak)....turns 9000 RPM easy all day long, lots of power...$10,000
Winters 4.86 QC, steel tubes, 60" centered with hubs and rotors and axles....out of a Skyrocket....$1,100
$10,500 for both....motor has carter mechanical gas fuel pump, pullies, water pump, stock distributor, wires.....also have the willys carb that was ran on it I would sell
563-210-3315
Winters 4.86 QC, steel tubes, 60" centered with hubs and rotors and axles....out of a Skyrocket....$1,100
$10,500 for both....motor has carter mechanical gas fuel pump, pullies, water pump, stock distributor, wires.....also have the willys carb that was ran on it I would sell
563-210-3315
Comment