377 SBC Brodix Track1 Heads

[mbrooks1986]

Great motor with less than 12 nights on fresh rebuild!

New Parts when rebuilt at beginning of 2013 have an * before part description.
Motor was only raced 11 times after rebuild. Didn't race much this year because of a project at home.

-377 Bowtie block
-Aluminum Brodix track 1 heads with extensive work by Ron's Porting Service With Matching Holley Intake
-Eagle H Beam Rods(6")
-4340 Eagle Crank (3.48 stroke/ 400 mains)
-Internally balanced
-4/7 swap
*-Cam Motions Camshaft
-SRP Pistons 9cc Dome
*-Gapless Rings
*-Double Roller Timing Chain
*-(Brand New With No Laps) Crower 1.6 aluminum Rockers
-Msd Distributor With Bronze Gear
-Fluid Damper
*-Pro/Cam Fuel Pump
-Water Pump
-Schoenfeld Headers
*- Clevite Cam, Crank, And Rod Bearings


Great Motor!!!!

Call Or Text For Information!

309-635-4891

$5000 ALL YOU'LL NEED IS A CARB AND GO!
TRADES CONSIDERED!

[mbrooks1986]

The rocker arms are new because the rocker arms that were used on this engine were loaned to me. I have returned these to original owner and replaced them with crower rockers.

[mbrooks1986]

Lower price $4500 will consider trades and credit cards are accepted!

[dirtdodger]

any idea of what kind of hp and torque numbers are?

[stilhead]

Are you sure it's a Bowtie block with "400" mains? Never saw a Bowtie block with "400" mains.

[mbrooks1986]

any idea of what kind of hp and torque numbers are?

Not sure on torque or hp numbers, because this motor has never been on a dyno.

[mbrooks1986]

Are you sure it's a Bowtie block with "400" mains? Never saw a Bowtie block with "400" mains.

Great motor with less than 12 nights on fresh rebuild!

New Parts when rebuilt at beginning of 2013 have an * before part description.
Motor was only raced 11 times after rebuild. Didn't race much this year because of a project at home.

-400 GM block
-Aluminum Brodix track 1 heads with extensive work by Ron's Porting Service With Matching Holley Intake
-Eagle H Beam Rods(6")
-4340 Eagle Crank (3.48 stroke/ 400 mains)
-Internally balanced
-4/7 swap
*-Cam Motions Camshaft
-SRP Pistons 9cc Dome
*-Gapless Rings
*-Double Roller Timing Chain
*-(Brand New With No Laps) Crower 1.6 aluminum Rockers
-Msd Distributor With Bronze Gear
-Fluid Damper
*-Pro/Cam Fuel Pump
-Water Pump
-Schoenfeld Headers
*- Clevite Cam, Crank, And Rod Bearings


Great Motor!!!!

Call Or Text For Information!

309-635-4891

$4500 ALL YOU'LL NEED IS A CARB AND GO!
TRADES CONSIDERED!

TRADES CONSIDERED!!!!!!!

[rangerrandy]

is it 23 degree also is it 4bolt and what is compression, last were are u im in mich

[mbrooks1986]

is it 23 degree also is it 4bolt and what is compression, last were are u im in mich

Peoria il, 23 degree, it is a 4 bolt main, and I will check with builder but I belive it's 11.5 on compression.

Depending on cash or trades I have 2 gm 400 blocks that could go with it and 40 gallons of 110 Sunoco fuel that I have left over from This year! Both 4bolt mains, both have been machined to build either a 406 or a 377, and one has billet Oliver splayed main caps!

[newmod09]

How much for just the blocks?

[mbrooks1986]

How much for just the blocks?

Call for information on blocks. 309-635-4891

[mbrooks1986]

Still for sale open for options!!!

[9D7]

what kind of trades are you looking for