Tweet
last of our race parts FOR SBC
eagle rods 6.125 honda journal 927 pin set of 8 used $150
carrilla rods 6.0 honda journal 865 pin set of 8 they have the oil hole from the big end to the top $400
herbert solid roller 592-595 lift at 1.5 rocker used A-1 $125
reed cam solid flat tappet 650 lift used but a-1 shape $100
new solid lifter with oiling hole in bottom full set new $75
750 street demon carb used but just came off our engine a-1 $150
pro custom oil tie down 7in shock R8-C3 $50
pro custom oil tie down 7in shock R8-C4 $50
world product heads 200 runner 60cc 2.05/1.60 valves with roller springs with matching high rise air gap intake same heads on engine below would like to sell head with engine but can separate $400 heads & intakeLast big motor we have is a 422. First 1000$ takes it.
pep 4340 steel crank
lenze rods
je dome pistons
200 runner WR heads 592/595 roller cam 1.6 roller rockers 7/16 studs with girdles.
crank was turned and rod re sized first of the year.and new rings and bearings.block has a small freeze crack on side that was repaired block is sound inside. this was a back up engine that i have no problem putting back together. all top end parts should be there plus some extra parts.all roller motor. thanks 336-284-4074 mocksville nc
eagle rods 6.125 honda journal 927 pin set of 8 used $150
carrilla rods 6.0 honda journal 865 pin set of 8 they have the oil hole from the big end to the top $400
herbert solid roller 592-595 lift at 1.5 rocker used A-1 $125
reed cam solid flat tappet 650 lift used but a-1 shape $100
new solid lifter with oiling hole in bottom full set new $75
750 street demon carb used but just came off our engine a-1 $150
pro custom oil tie down 7in shock R8-C3 $50
pro custom oil tie down 7in shock R8-C4 $50
world product heads 200 runner 60cc 2.05/1.60 valves with roller springs with matching high rise air gap intake same heads on engine below would like to sell head with engine but can separate $400 heads & intakeLast big motor we have is a 422. First 1000$ takes it.
pep 4340 steel crank
lenze rods
je dome pistons
200 runner WR heads 592/595 roller cam 1.6 roller rockers 7/16 studs with girdles.
crank was turned and rod re sized first of the year.and new rings and bearings.block has a small freeze crack on side that was repaired block is sound inside. this was a back up engine that i have no problem putting back together. all top end parts should be there plus some extra parts.all roller motor. thanks 336-284-4074 mocksville nc