Tweet
I have lost interest in racing, I built a new Harris Car last winter and spared no expense. It was featured in Speedway Illustrated during the build. I am willing to sell it in many different ways. let me know what you are thinking. Call or text for pictures 517-643-2752
Its a Black 2015 Harris with standard foot box, 22 gallon wedge cell mounted as forward as it can go with a quick change. it has the heavy duty left side nerf bar and right side nerf bar. The body is black too. It will have new sides on it, the rest will be as raced.
I am willing to sell turn key with a 12.5:1 421 SBC. Dart M block, Dan olsen pan, Dyers Rods, Callies Crank, Brodix ported heads, T&D rockers, Brodix intake, JE pistons, Solid Roller cam. Very nice piece 8 nites since fresh. They pan has 5 nites on it. I didnt like the other pan I had. Willies 850 cfm gas carb. Turn key price is $22,000
Roller form - $11,000
ChassisMSD HVC ignition
16 volt Power XS battery with charger
Keyers lowers Keyser Dual pass Radiator - 16AN upper fitting, can be changed easily.
Harris uppers
Harris Spindles
Sweet 8:1 Box
Sweet Collapse-able column
Wehrs firewall bearing
Harris Midplate
Steel break lines with stainless nuts
Allstar nylon coated stainless braided lines
Wilwood pedal assembly
Coleman bearing gas pedal
Wehrs Shifters with linkage
Outerwears for the radiator
Typical Chevelle steering parts from Keyser
Chromoly heim PTFE heims on the whole car - many spares
keyser swedge tubes
Longacre stepper motor gauges and switch panel
Simpson belts made for Hans
Joes lightweight steering wheel
BSB XD bird cages
BSB SX Jbar and climbing mounts
Winters Quick change
Harris pull bar mounts
JRI SL14 Shocks with schraders and base valve Slick track valved by JRI... VERY NICE!
BSB bearing chain mounts on the rear end
Wehrs slider
Eibach springs
Keyser fill and breather for the rear end
Keyser pull bar 3 way with 1050 spring
Integra Stealth Base valve 90/10
Moser floater hubs
Howe brake calipers
All braded hoses for everyting, black hose with black AN fittings
Turn Key minus Engine - $14,500
Lajoie Seat 17" diamond series
Sweet/Waterman Tandem pump, set up for rear mount.
Brinn Magnesium bell housing with powermaster starter
Brinn Flywheel and drive hub
Spare flywheels and hub for bert bellhousing
Spare Bert Bellhousing Aluminum, weldedSpare Brinn Starter
Bert LMZ Transmission - 8 races since new
Integra Rough track Stealth Shocks - Non Schrader - 7 races old.
All other Spares.
Its a Black 2015 Harris with standard foot box, 22 gallon wedge cell mounted as forward as it can go with a quick change. it has the heavy duty left side nerf bar and right side nerf bar. The body is black too. It will have new sides on it, the rest will be as raced.
I am willing to sell turn key with a 12.5:1 421 SBC. Dart M block, Dan olsen pan, Dyers Rods, Callies Crank, Brodix ported heads, T&D rockers, Brodix intake, JE pistons, Solid Roller cam. Very nice piece 8 nites since fresh. They pan has 5 nites on it. I didnt like the other pan I had. Willies 850 cfm gas carb. Turn key price is $22,000
Roller form - $11,000
ChassisMSD HVC ignition
16 volt Power XS battery with charger
Keyers lowers Keyser Dual pass Radiator - 16AN upper fitting, can be changed easily.
Harris uppers
Harris Spindles
Sweet 8:1 Box
Sweet Collapse-able column
Wehrs firewall bearing
Harris Midplate
Steel break lines with stainless nuts
Allstar nylon coated stainless braided lines
Wilwood pedal assembly
Coleman bearing gas pedal
Wehrs Shifters with linkage
Outerwears for the radiator
Typical Chevelle steering parts from Keyser
Chromoly heim PTFE heims on the whole car - many spares
keyser swedge tubes
Longacre stepper motor gauges and switch panel
Simpson belts made for Hans
Joes lightweight steering wheel
BSB XD bird cages
BSB SX Jbar and climbing mounts
Winters Quick change
Harris pull bar mounts
JRI SL14 Shocks with schraders and base valve Slick track valved by JRI... VERY NICE!
BSB bearing chain mounts on the rear end
Wehrs slider
Eibach springs
Keyser fill and breather for the rear end
Keyser pull bar 3 way with 1050 spring
Integra Stealth Base valve 90/10
Moser floater hubs
Howe brake calipers
All braded hoses for everyting, black hose with black AN fittings
Turn Key minus Engine - $14,500
Lajoie Seat 17" diamond series
Sweet/Waterman Tandem pump, set up for rear mount.
Brinn Magnesium bell housing with powermaster starter
Brinn Flywheel and drive hub
Spare flywheels and hub for bert bellhousing
Spare Bert Bellhousing Aluminum, weldedSpare Brinn Starter
Bert LMZ Transmission - 8 races since new
Integra Rough track Stealth Shocks - Non Schrader - 7 races old.
All other Spares.
Comment