Tweet
its time to get rid of my racing stuff
sbc 1010 block .40 over
sbc shp 350 mains 4.25 bore needs sleeve
2 scat 3.75 cranks std/ std one 42 lbs one 57 lbs
set .40 je pistons ft with comp .6.0 rods
braswell 850 alcohol carb fresh
baker fuel pump
c&s fuel log with by pass never used
23* try-y headers
23*brodix -10 49 cc
23* dart heads 230 64 cc
23* roller lifters
18* roller lifters 23* edelbrock intake 3502900
alcohol jet kit
msd pro bilet with scott wires
morsro oil pan with several oil pumps
race tronics traction control entire kit this is the one that run off ps / and runs brakes
2 winters 5x5 hubs complete
rr advance gas shock w/o shradervalve never used ,
90/10/ afco
set of gas bilstinen 3 race old
pierce pull bar
2 pierce modified rad , 1 had been repaired
sfi light flywheel
alum bell housing sbc
lots of pierce front end parts almost 3 sets
lots of other things , just ask ,
217 493- 3727
thanks jeff
sbc 1010 block .40 over
sbc shp 350 mains 4.25 bore needs sleeve
2 scat 3.75 cranks std/ std one 42 lbs one 57 lbs
set .40 je pistons ft with comp .6.0 rods
braswell 850 alcohol carb fresh
baker fuel pump
c&s fuel log with by pass never used
23* try-y headers
23*brodix -10 49 cc
23* dart heads 230 64 cc
23* roller lifters
18* roller lifters 23* edelbrock intake 3502900
alcohol jet kit
msd pro bilet with scott wires
morsro oil pan with several oil pumps
race tronics traction control entire kit this is the one that run off ps / and runs brakes
2 winters 5x5 hubs complete
rr advance gas shock w/o shradervalve never used ,
90/10/ afco
set of gas bilstinen 3 race old
pierce pull bar
2 pierce modified rad , 1 had been repaired
sfi light flywheel
alum bell housing sbc
lots of pierce front end parts almost 3 sets
lots of other things , just ask ,
217 493- 3727
thanks jeff
Comment