Tweet
I have a 377 sbc that was built last year!
Only about 80 laps on the motor .
Motor specs
Fresh bored 4.030 block
Splayed steel caps
Cleavite bearings
Hastings rings
Icon forged t-6 aluminum pistons
Lunati 6" rods reconditions for round journals last year.
Gm forged hardened crank
Oil restrictors
Oil valley holes enlarged on ends with screens.
Breather tubes in center holes
Valley has been polished for easy flow return
Water holes in decking has Moroso restrictor plugs ,
New melling hv oil pump
Freshly decked but must use .053 gaskets wichita I have $160 5 layer steel gaskets.
Race oil pan with windage tray 8 qt
Currently has no cam in it but I have a custom ground cam at grinder shop.
Heads are basically brand new.
I mean they have no laps in fact they still at shop ready to pick up
They are world product 200cc runner
2.02 intake 1.6 exhaust valves. All new machine work with new valves, springs, retainers, locks and guides,
Victor junior 4bbl intake .protronics aluminum high output distributor with custom jr motorsports 8 mm big wires all labeled.
Looking to get as close to $6500 from oil pan to intake
I also have a race demon alky 750 carb that I will let go with motor could be a drop and go race deal or will sell shortblock only,
Long block will include all pullies, water pump, powersteering . Ignition, etc.
Only about 80 laps on the motor .
Motor specs
Fresh bored 4.030 block
Splayed steel caps
Cleavite bearings
Hastings rings
Icon forged t-6 aluminum pistons
Lunati 6" rods reconditions for round journals last year.
Gm forged hardened crank
Oil restrictors
Oil valley holes enlarged on ends with screens.
Breather tubes in center holes
Valley has been polished for easy flow return
Water holes in decking has Moroso restrictor plugs ,
New melling hv oil pump
Freshly decked but must use .053 gaskets wichita I have $160 5 layer steel gaskets.
Race oil pan with windage tray 8 qt
Currently has no cam in it but I have a custom ground cam at grinder shop.
Heads are basically brand new.
I mean they have no laps in fact they still at shop ready to pick up
They are world product 200cc runner
2.02 intake 1.6 exhaust valves. All new machine work with new valves, springs, retainers, locks and guides,
Victor junior 4bbl intake .protronics aluminum high output distributor with custom jr motorsports 8 mm big wires all labeled.
Looking to get as close to $6500 from oil pan to intake
I also have a race demon alky 750 carb that I will let go with motor could be a drop and go race deal or will sell shortblock only,
Long block will include all pullies, water pump, powersteering . Ignition, etc.