Tweet
MSD Pro Mag 12LT p/n 7908 with adjustable slip collar and brand new brass gear. Also two ignition boxes one p/n 8106 which is a high endurance box. This was just rebuilt by MSD. The other box p/n 8105 which is the standard ignition box. I also have the wiring harness along with the on/off switch and coil wire. All of this retails for well over 2,000 new will sell for 1,200.00 OBO.
Call Dale 609-820-9134 or email dale.stewart@officedepot.com
Electronic Points Box PN 8105
• Standard
• Less than 50 lap events
• Requires 200-250 cranking rpm
Electronic Points Box PN 8106
• Extra Endurance
• Recommended for races longer than 50 laps
• Requires 200-250 cranking rpm
PRO-MAG 12LT PN 7908
The 12LT is uses a billet aluminum housing that the generator assembly mounts to. With the lower housing clamped into position in the engine, any timing changes can be made by simply loosening the band clamp and rotating the generator. This saves time and is much easier than having to rotate the entire lower housing assembly.
Call Dale 609-820-9134 or email dale.stewart@officedepot.com
Electronic Points Box PN 8105
• Standard
• Less than 50 lap events
• Requires 200-250 cranking rpm
Electronic Points Box PN 8106
• Extra Endurance
• Recommended for races longer than 50 laps
• Requires 200-250 cranking rpm
PRO-MAG 12LT PN 7908
The 12LT is uses a billet aluminum housing that the generator assembly mounts to. With the lower housing clamped into position in the engine, any timing changes can be made by simply loosening the band clamp and rotating the generator. This saves time and is much easier than having to rotate the entire lower housing assembly.