Error and no help form the administrator

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jr18
    Member
    • Sep 2009
    • 87

    #1

    Error and no help form the administrator

    wel, I cant get 4m admen to help. I have sent about 4 or 5 messages to them.

    I though i would post this and see if any one could tell me whats wrong.
    I get an error when i open this site and when i view others post. here is the error that i get. thanks for any help.

    Your submission could not be processed because a security token was missing.

    If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error.
    4m.net - The Most Opinionated Racing Message Board In The Universe
    Last edited by jr18; 02-17-2011, 08:19 PM.
  • H3FAN
    Member
    • Nov 2008
    • 52

    #2
    This was posted on a thread about Security Token. It seems to fix the problem. I don't remember who posted it, but it works.

    OK, here it is, unofficial as possible....
    IF you are still getting the security token error, here is what to do....
    Once you do get in, along the top edge of the forum is where it says
    new posts, private messages, etc.... go to 'forum actions' and under
    that is 'general settings', click on that button....
    Scroll down to the 'date and time options'
    Go to where it says 'DST Correction Option'
    Set it so it says "DST Corrections always off"
    At the bottom, click "Save Changes"
    Close the window, come back to 4m and see if it works....
    The original point and click interface was a Smith & Wesson

    Comment

    • jr18
      Member
      • Sep 2009
      • 87

      #3
      Thanks H3Fan,
      That was easy.

      I don't know why the admen could help me.

      Comment

      • racenut
        Senior Member
        • May 2007
        • 3718

        #4
        Originally posted by jr18 View Post
        Thanks H3Fan,
        That was easy.

        I don't know why the admen could help me.
        They did not respond to anyone that I know of....
        I was just lucky and came across the 'cure' and it worked....
        Glad to have helped fellow 4mers....
        Racenut Rambles on Facebook

        Comment

        • kmdfrock
          Senior Member
          • Aug 2009
          • 250

          #5
          that worked.
          mind freak (chuck greer)

          Comment

          • Racer63
            Senior Member
            • May 2007
            • 285

            #6
            Worked for me also.

            Comment

            • H3FAN
              Member
              • Nov 2008
              • 52

              #7
              Racenut, I tried to use you quote to reply but I can't get it to work. So thank you for helping us. I couldn't remember who posted the help.
              The original point and click interface was a Smith & Wesson

              Comment

              • racenut
                Senior Member
                • May 2007
                • 3718

                #8
                Originally posted by H3FAN View Post
                Racenut, I tried to use you quote to reply but I can't get it to work. So thank you for helping us. I couldn't remember who posted the help.

                I have found on the 'reply' and such buttons, it works best to double-click on the button, then if that don't work in a few seconds, click again and it normally will work....
                Racenut Rambles on Facebook

                Comment

                • Dirt Frog
                  Senior Member
                  • May 2007
                  • 1234

                  #9
                  Thanks for the help!!!!!!

                  Comment

                  • oldtimer44
                    Junior Member
                    • May 2007
                    • 29

                    #10
                    Add me to the list of people you helped. Thanks

                    Comment

                    • mqdirtracer57
                      Senior Member
                      • Mar 2008
                      • 493

                      #11
                      thanks...worked for me too!!

                      Comment

                      • F22 RAPTOR
                        Senior Member
                        • Jul 2010
                        • 1023

                        #12
                        Originally posted by H3FAN View Post
                        This was posted on a thread about Security Token. It seems to fix the problem. I don't remember who posted it, but it works.

                        OK, here it is, unofficial as possible....
                        IF you are still getting the security token error, here is what to do....
                        Once you do get in, along the top edge of the forum is where it says
                        new posts, private messages, etc.... go to 'forum actions' and under
                        that is 'general settings', click on that button....
                        Scroll down to the 'date and time options'
                        Go to where it says 'DST Correction Option'
                        Set it so it says "DST Corrections always off"
                        At the bottom, click "Save Changes"
                        Close the window, come back to 4m and see if it works....
                        Worked for me, thanks!!!
                        "If racing were easy, everybody would do it."

                        #77 Leon "Slick" Sells

                        Comment

                        • gadirtracer
                          Senior Member
                          • Dec 2007
                          • 1039

                          #13
                          Worked for me toooooo, thanks a bunch!
                          Gill T. Azell

                          Comment

                          • dirtnut1
                            Member
                            • May 2007
                            • 76

                            #14
                            worked here too.

                            Comment

                            • Fastway
                              Member
                              • May 2007
                              • 87

                              #15
                              thank you, works great now

                              Comment

                              Working...
                              X