Elkins Results 6-3-11

[Zero]

Elkins Raceway Results 6-3-10
Super lates
1. Jared Hawkins
2. Tim Senic
3. Bob Gordon
4. Billy Holbert
5. Cody Hardesty
6. Skip Hare
7. Gary Dalton
8. Josh Coffman
9. Chad McClelland
10. Tracy Sampson
11. Nicholas Corley
12. Shaun Poling
13. Chuck Harper
14. Steve Booth
15. Quinton Wyandt
Roy’s RV Supercenter Thunder Runner 30 for Valley Supply Fastracks
1. Shane Hitt
2. Nolan Dalton
3. Bob Cossell IV
4. Kyle Thomas
5. Kris Southern
6. Shawn Jett
7. Greg Hicks
8. Daniel hill
9. Steveyan n Dotson
10. Cody Rogers
11. Kevin Keene
12. AJ Johnson
13. Jamie McCloud
14. Tom Keplinger
15. Dusty Hamrick
16. Stan Spooner
17. Gary May
18. Chad Green
19. Scott Beitzel
DNS Mike Lewis
AMRA Millers Used Cars Mods
1. Shaun Davis
2. Louie Krushanski
3. Brent Trimble
4. Tom Sigler
5. Deana Groves
6. Ryan Montgomery
7. Mike Murphy
8. Chad Dotson
9. Bill Vandevender
10. Matt Chenoweth
11. Josh Revels
12. Michael Cromer
13. Mike Cromer
14. Larry Atha
15. Brandon Kerr
16. Jeff Hess

Dont Forget the Chuck Gear Trophy in 2 weeks June 17th, $3,000 to win for super lates

[randy bohan]

come on zero.........you could be my hero.........but noooooooooooo..... i think the street stock,4 bangers and wedges paid the same money to race as the fore mentioned classes on your post................where's the love man??????????

[Zero]

Ok Randy....heeeeeeer ya go!~.....

Street Stocks....

Jim Byers
Rick Vest
RANDY BOHON (the worlds most Greatest Street stock Driver)
Johnny Singleton
Bryan Mitchell
CJ McLean
Samantha Rogers
Dustin Isner
Robin Maxon
Wes herron
Jamie Keene
Ken Vest
Robert Isner
**Jr Auvil NS
4 cyls
Donnie Wamsley
Jason Frazier
Frank Jones
Anthony Lopez
Dusty Wamsley

I was Not given a rundown on the mini's by the Mini people.....so, I cant post it....hopes this helps randy...I wont let it slip by me again

[lightning2597]

SOOOOO...... when is the BOUNTY going to be put out on the "Hawkins Boys"!?! Those kids are on a rail at ELKINS!!!!!!

[randy bohan]

[QUOTE=Zero;1384884]Ok Randy....heeeeeeer ya go!~.....

Street Stocks....

Jim Byers
Rick Vest
RANDY BOHON (the worlds most Greatest Street stock Driver)

thanks so much zera
i sense a hint of sarcasism
opps ...sorry i misspelled your name
thanks for the up date though

[randy bohan]

hey zero
on a serious note
why don't you send someone around at the knob tonite with something to try and get the street stock fellers to come come down next week for the 500 show and promote on here for some more cars next week...
by the way thanks for all your efforts...
great show last nite .
car counts are really picking up.
wreckers,inspectors,staff all get an a+ rating

[lightning2597]

hey zero
on a serious note
why don't you send someone around at the knob tonite with something to try and get the street stock fellers to come come down next week for the 500 show and promote on here for some more cars next week...
by the way thanks for all your efforts...
great show last nite .
car counts are really picking up.
wreckers,inspectors,staff all get an a+ rating

WELL...... there are alot of STREET STOCKERS from the Knob that would love to come to Elkins next week....... problem is, rules are different. Most Knob guys have their frames slighty modified by the front tires for tire clearance....... and Elkins does not alow that! SOOOOO....... until all tracks in the area get on board with the same set of rules, you are going to be stuck with the same old group of cars at each track....... NO MATTER WHAT THE RACE PAYS!!!!!!! (SUCKS!)

[randy bohan]

Most Knob guys have their frames slighty modified by the front tires for tire clearance.....

please clarify and secondly why the hell would that matter..
you think that modifing the frame for tire clearance is the ISSUE?
WAKE UP AND GET THE FACTS STRAIGHT before responding as such...rules state stock frame with stock mounting locations on all suspension parts with the exception of
the shocks.the frame can be fabed from the center of the rear housing and back ONLY.....
THAT RULES OUT CHASSIS CARS,JIG CARS OR WHATEVER YOU WISH TO REFER TO THEM AS
NOW LET'S GET BACK TO PROMOTING A HELLAVA STREET SHOW FOR NEXT WEEK.
I'LL DONATE 50 BUCKS TO THE 500
ANY OTHER TAKERS??

[Zero]

No sarrr kasm here Randy ole pal.....just glad to oblige......

[lightning2597]

Junkyard cars at the Knob even have their frames altered for tire clearance...... BUDDY! They cut the Bump off of the frame behind the front tires and then plate it so that they can get more counter steer and such!!!!!! It is something that just kind of caught on and everyone is doing it! I GUESS THIS TRICK HAS NOT MADE IT TO ELKINS YET........ MAYBE THAT IS WHY EVERYTIME A KNOB CAR SHOWS UP THERE AND BROOMS THE FIELD...... THEY EITHER GET DISQUALIFIED OR A NEW RULE IS CREATED SO THAT THEY CAN NEVER COME BACK! (OR)...... MAYBE, THE KNOB CHARGERS (pure stocks) SHOULD JUST COME. Considering...... all the more competition that is in the Street Stocks at ELKINS....... I think they would do just fine!


OH............. and if you don't like this truth that is being spoke, why don't you bring your car to the KNOB! (They let you race there!)

[let-r-eat]

I started to post about the rules Elkins has posted, they are not the "best" rules I've seen but you can get the feel for what they're trying to accomplish. "Don't come with UMP's with fenders installed?". Everyone in racing likes to take guns to knife fights. Alot of the "Street Stocks" that are out there racing came from "Pure Street" and are racing basically the same car with "e-mod" tires. By the rules on the website I really can't see much difference other than the tires?

[randy bohan]

Junkyard cars at the Knob even have their frames altered for tire clearance...... BUDDY! They cut the Bump off of the frame behind the front tires and then plate it so that they can get more counter steer and such!!!!!! It is something that just kind of caught on and everyone is doing it! I GUESS THIS TRICK HAS NOT MADE IT TO ELKINS YET........ MAYBE THAT IS WHY EVERYTIME A KNOB CAR SHOWS UP THERE AND BROOMS THE FIELD...... THEY EITHER GET DISQUALIFIED OR A NEW RULE IS CREATED SO THAT THEY CAN NEVER COME BACK! (OR)...... MAYBE, THE KNOB CHARGERS (pure stocks) SHOULD JUST COME. Considering...... all the more competition that is in the Street Stocks at ELKINS....... I think they would do just fine!

OH............. and if you don't like this truth that is being spoke, why don't you bring your car to the KNOB! (They let you race there!)

if youin's are counter steering that much maybe youin's have missed the set up a bit.....if thats a trick ,maybe i should spend a couple grand so i can i can trick my ride to be that fast..i never said these fellas ain't fast. i just said "READ THE RULES AND BRING A CAR THAT MATCHES THAT RULE PACKAGE"...simple ... no new rules......
as for bringing my car to the knob...
why bring a legal car there to race against chassis car that are considerably faster?
why race for 5th place and consider that a win
read the rules and then tell everyone on this public forum the facts and save the bs for folks who know no better

[randy bohan]

hey let -er -eat there's quite a bit of difference actually.
300 lb's less weight,direct couplers instead of flywheels and clutches,racing trans just like lates,and unlimited engines.. the only restriction being steel heads and block and no alcohol
i still run a q-jet carb ,stock intake,10.5 clutch and a saginaw 3 speed

I started to post about the rules Elkins has posted, they are not the "best" rules I've seen but you can get the feel for what they're trying to accomplish. "Don't come with UMP's with fenders installed?". Everyone in racing likes to take guns to knife fights. Alot of the "Street Stocks" that are out there racing came from "Pure Street" and are racing basically the same car with "e-mod" tires. By the rules on the website I really can't see much difference other than the tires?

[th3Swami]

i think going to the knob tonight would be a waste. mainly because there wont be any racecars there.

[st80]

Rules

As Per Roaring Knob: B. FRAMES - No fabricated frames, must be full factory or unibody. Full factory must be intact and not rusted out. You may plate
repair a rusted out spot only, nothing more. If a unibodied frame is used it must be tied together with a 2" by 3" frame box, minimum
.120 wall thickness, between existing front frame section and existing rear frame section

D. SUSPENSION - Must be stock OEM and in stock location, tubular aftermarket steel upper control arms may be used but must be
in stock location. Shocks and springs must be stock OEM type and in stock location. NO after market cross members or control
arms permitted. No panhard bars or additional bars or links may be added with the exception of the bar notation in rear end rule
below

Rules per Elkins Raceway:

13. FRAME
101” minimum wheelbase. Complete stock production frame required to center of rear axle. Frame rails may not be modified. Cross
member may be modified for clearance only. Tubing frame replacement permitted behind center of rear axle. All frame tubing should
be constructed of minimum 2” wide x 3” high square steel tubing, with .120” minimum material thickness. No holes may be cut in
frame. All other chassis tubing should be 1 ½” to 1 ¾” outside diameter and minimum .083” thickness.
Unibody frames must have full snout and rear subframe to center of rear axle and should be connected by minimum 2” wide x 3” high
steel rectangular tubing connector rails with .120” minimum wall thickness. Unibody connector rails must be connected to the back of
the front snout and the front of the rear subframe. No holes may be cut in frame or connectors. Unibody frame may be shortened in
the tub area, but complete front subframe and rear subframe to center of rear axle must remain stock.
Car should have horizontal safety bar constructed from same steel tubing as frame, mounted behind fuel cell and securely welded to
frame. Rear bumper should be at least 4” behind fuel cell. Center of rear bumper and safety bar should be at rear deck center height,
approximately 19” from the ground and should be at least as wide as frame. Tubing should also extend downward to form a horizontal
bar at the bottom height of the fuel cell, with additional vertical and diagonal tubing bracing the lower tubing to the rear bumper and the
safety bar. Lower tubing should be at least as wide as fuel cell. No part of the fuel cell should be below the protective tubing. Any
bumper that extends more than 8” from the rear of frame should be rounded and directed toward the front of car. Loop-style rear
bumpers—OK. Bumper should not have any sharp edges. No external rub rails. All frame tubing should be constructed of minimum
2” wide x 3” high square steel tubing, with .120” minimum material thickness. No holes may be cut in frame. All other chassis tubing
should be 1 ½” to 1 ¾” outside diameter and minimum .083” thickness

Seems like cars that are being dq'd at Elkins should be dq'd at Roaring Knob!! READ THE RULES

I KNOW SOME OF YOU ARE STILL NOT GOING TO UNDERSTAND!!! ITS IN BLACK AND WHITE BOYS!!