Real Stock Cars at Knoxville...
Collapse
X
-
Krooser: love the link.
maybe this race?:
some great names from my early youth in those results.And the days that I keep my gratitude higher than my expectations, well, I have really good days - Ray Wylie Hubbard
Comment
-
Those Hemi MoPars rumbling down the straight away....I can still hear them. Notice the # 75 Butch Hartman, many time champion of the USAC Stock Cars. #9 Don White....#6 Lem Blankenship...#99 Verlin Ecker.......Chuck McWilliams won that race driving a Porter Lanigan 1972 Plymouth. You all missed out on a great era of Stock Car Racing.Last edited by MUD MAESTRO; 01-11-2018, 05:38 PM.
Comment
-
Yes, when those Hemi's talked, everyone listened. They had a sound of their own. Funny thing, most of them where close to stock. After market cam and pistons for more compression and a little tweek on the oiling system plus a good valve job. Forged crank and rods was out of the box stock.
Comment
-
If you remember HOFamer and master mechanic Ernie Derr of Keokuk Iowa help develop the Hemi for racing. If i may add, Derr was the best I ever saw on dirt.Originally posted by Bubstr View PostYes, when those Hemi's talked, everyone listened. They had a sound of their own. Funny thing, most of them where close to stock. After market cam and pistons for more compression and a little tweek on the oiling system plus a good valve job. Forged crank and rods was out of the box stock.
Comment
-
Ernie Derr and later Ramo Stott, on the front straight with the sound of those hemis reverberating through the covered grandstand is the most spine tingling engine noise I have heard to this day in circle track racing. It hooked me on short track racing.I hate time trials.
Comment
-
There was quite a bit more "massaging" than that!Originally posted by Bubstr View PostYes, when those Hemi's talked, everyone listened. They had a sound of their own. Funny thing, most of them where close to stock. After market cam and pistons for more compression and a little tweek on the oiling system plus a good valve job. Forged crank and rods was out of the box stock.
My dad worked for Ray Fox in 1965 and they set the world record for a closed course at 181 mph at Daytona!
This article also mentions Larry Flynn, who was my uncle. He won over 400 hundred races and most were Ray Fox prepared cars. My dad was Larrys crew chief.
Last edited by a25rjr; 01-11-2018, 07:51 PM.Turn LEFT, Vote RIGHT!
Comment
-
Really, most short track and drag racers, just did a .010 over bore, blueprint for clearance, higher compression pistons [15.5/1 with a tight deck clearance and larger head bolts. Blue print the rockers, a 5 to 8 stage valve job. If you turn it 8k or over you need cross bolt oilers. If you made any more hp than that, you couldn't hook it up on the hard 13.50 tires in the day. Funny thing about them hemis, they couldn't pull a dead ho off the toilet under 5k rpms, but they came alive around there. They breathed too well to keep velocity up at lower rpm. MOPAR sold two hemi, Street and race. They also had aluminum heads available. Note, there is a left and right head. Do it wrong and you will have a oily floor.
The 427 ford had a better HP curve, but was short on top end. The BBChevy had a better hp at lower rpm.
Comment
-
-
I was very young but I vividly remember guys like Don White, Butch Hartman and Ernie Derr rattle the rafters of the grandstands at the Springfield Mile. Those young enough that generic late models are all that they’ve ever known certainly missed some great cars and some of the best drivers ever.!!
Comment
-
Thee was something in the water, down in Keocuk Iowa. They grew racers there. Don't forget, not only Derr and White, but Ramo Stott, Lem and Gordy Blankenship, Don White and (not a nice word)(not a nice word)(not a nice word)(not a nice word) Hutcherson. Old Earnie Derr the gray fox was the best and mentor to the rest.
Comment
Comment