They are glued to the inner sidewall.
Kevlar Tire Inserts
Collapse
X
-
-
-
Ehhh, way to many variables, seems like it can have just as many if not more disadvantages, and I dont think there is enough data to prove what they are saying about reducing heat is true. Merely speculation...
Comment
-
Right on they are both to blame they make it lighter, stronger, more expensive cause they know racers will buy it driving the price of racing through the roof.. racing was affordable back in day cause alot of these manufacturers didnt exist and you got your parts from a junkyard or made them yourself, but thats not the world we live in today unfortunately...Originally posted by Tireguy17 View PostI'm sure that is the case on alot of part improvement, but I'm sure just as many evolve from the manufacturer making a part "lighter" or "low drag" or "low friction" or some exotic material and increase the price on the racer.
Should be interesting to see if the results in the coming weeks show who may have been guilty of using this item on their tire(s).
Comment
-
This is a rhetorical question:
So if I make a insert that goes into the tire like a tube and it's not glued to the tire and can be removed and reused, is that legal....................
Hmmm
Comment
-
-
I’m calling BS. Just another rumor on the mill. Reduces flex in the sidewall to reduce heat is what throws me off. I understand the concept but it’s not like these guys run low enough air pressure in the RR to get over on the sidewall anyway. It would throw the balance of the tire off also and if you had a tire come apart there would be no hiding the evidence. Possible but doubtful
Comment
-
No idea who wrote that or where they got that info about the heat, but part of the idea is to change the side wall flex and therefore the forward drive of the tire.
Back in the day, some LR tires had wedges in the side wall at the bead extending but tapering down into the side wall to stiffen the side wall for more forward from a LR tire.
Changing the tire carcass in anyway will/can effect the tires performance good or bad but it will have an effect, why do you think you can get Hoosier tires in different carcass's right now....
"not like these guys run low enough air pressure in the RR to get over on the sidewall anyway"
Guess you are new, because even at the STD air pressure the RR can roll so far over you can remove all the white paint off the hoosier lettering or that the beadlock is less then an inch from touching the ground at the right high speed/banked/tacky tracks easily, so much so you have to add pressure over the STD.Last edited by billetbirdcage; 06-05-2018, 04:47 AM.
Comment
-
My guess is that it would be legal until you won some races, then it wouldn't be legal anymore.Originally posted by billetbirdcage View PostThis is a rhetorical question:
So if I make a insert that goes into the tire like a tube and it's not glued to the tire and can be removed and reused, is that legal....................
Hmmm
Comment
-
If you ever drove a SLM you know that used tires lose feel. The tires are big and feel like marshmallows, and when there used, some say more than 3 runs, the side walls get weakened and then lose feel in the car. Along with sharper edges that obviously add more feel.
I could see tire inserts being a big deal, even inner liners for dual air pressures.
Just say no...
Comment
-
The first test of the Kevlar inserts was done at Deer Creek. So the "story" of Kevin Rumley noticing something on Bloomquist's wheel at the Show Me and that is when the testing began is absolutely false.
LR tire is what they are checking.
The above posts about the tire would be LR, stiffening the sidewall, inserts allow lower tire pressures to be run and lower heat in tire are spot-on and shows the knowledge and understanding of those posts.
If your interested in what is going on... discuss with Rick Schwallie, Steve Francis or one of the crew members of the Lucas teams... they all know what is going on, what the insert is for and why the advantage.
Rich Olson
Minneapolis, MN
Comment
-
It's not just absolutely false. It's absolutely impossibleOriginally posted by FANSFund View PostThe first test of the Kevlar inserts was done at Deer Creek. So the "story" of Kevin Rumley noticing something on Bloomquist's wheel at the Show Me and that is when the testing began is absolutely false.
LR tire is what they are checking.
The above posts about the tire would be LR, stiffening the sidewall, inserts allow lower tire pressures to be run and lower heat in tire are spot-on and shows the knowledge and understanding of those posts.
If your interested in what is going on... discuss with Rick Schwallie, Steve Francis or one of the crew members of the Lucas teams... they all know what is going on, what the insert is for and why the advantage.
Rich Olson
Minneapolis, MN
Comment
Comment