Late Models - Universal Body Rules.....

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ZERO25
    replied
    Heres the link to Rays video:

    Leave a comment:


  • JabberJaws83
    replied
    You are 100% correct. Then let’s bring in their buddy to try to police it all

    Leave a comment:


  • Josh Bayko
    replied
    Originally posted by JabberJaws83 View Post
    Which is why none of this should be that hard
    If everybody would have just stuck to their guns, it’d still be at 36”. The biggest thing would be to get people to tech that aren’t p*ssies.

    Leave a comment:


  • ALLDIRT
    replied
    Ten grand in the hand , is better than a Hoosier in the bush .

    Leave a comment:


  • JabberJaws83
    replied
    Originally posted by Josh Bayko View Post
    There was a firecracker back in like 13 or 14. 17 guys failed deck height after time trials.

    It went up to 39 the next year or the year after.
    Which is why none of this should be that hard

    Leave a comment:


  • Josh Bayko
    replied
    Originally posted by MasterSbilt_Racer View Post
    I'm not sure why it ever changed Josh. I remember a few years back getting a car from CJ, right after that changed. We threw an engine in it and took it racing. Tech guy told us we were 3" low.
    There was a firecracker back in like 13 or 14. 17 guys failed deck height after time trials.

    It went up to 39 the next year or the year after.

    Leave a comment:


  • MasterSbilt_Racer
    replied
    I'm not sure why it ever changed Josh. I remember a few years back getting a car from CJ, right after that changed. We threw an engine in it and took it racing. Tech guy told us we were 3" low.

    Leave a comment:


  • Josh Bayko
    replied
    Just move the decks back down to 36”.

    Leave a comment:


  • MasterSbilt_Racer
    replied
    Originally posted by cjsracing View Post
    I have a regular enclosed trailer and mine fits in just fine with the right side door and quarter flared out. Other than that the other measurements in Ray's video would have no effect on a car fitting in a trailer.

    And if you want to build your body without it flared so it fits in your trailer then go ahead. But those of us who want to give some character to our cars should be allowed to.
    We struggle. I know there are normal width trailers with a wider opening than ours, but still... We shouldn't be penalize on aero because we don't have a semi trailer.
    Last edited by MasterSbilt_Racer; 12-17-2021, 01:19 PM.

    Leave a comment:


  • MasterSbilt_Racer
    replied
    Originally posted by Drop Shock View Post
    Having the droop rule AND having a LR deck height rule of 39 inches at ride height is counter productive. Now they are literally forcing everyone to run the same drop. What fun is that?
    None at all. It seems having fun isn't important anymore. I guess it could be worse, I could be Bloomer. He might as well retire over this.

    Leave a comment:


  • Drop Shock
    replied
    Having the droop rule AND having a LR deck height rule of 39 inches at ride height is counter productive. Now they are literally forcing everyone to run the same drop. What fun is that?

    Leave a comment:


  • dirtSLMracing
    replied
    Originally posted by cjsracing View Post
    I have a regular enclosed trailer and mine fits in just fine with the right side door and quarter flared out. Other than that the other measurements in Ray's video would have no effect on a car fitting in a trailer.

    And if you want to build your body without it flared so it fits in your trailer then go ahead. But those of us who want to give some character to our cars should be allowed to.
    So why have any rules? I'm sure there are some rules you are for that others are against.

    Leave a comment:


  • cjsracing
    replied
    Originally posted by MasterSbilt_Racer View Post
    I'd like them to fit in a regular enclosed trailer. Start pulling some strings and tapes. It isn't as rigid as you might think.
    I have a regular enclosed trailer and mine fits in just fine with the right side door and quarter flared out. Other than that the other measurements in Ray's video would have no effect on a car fitting in a trailer.

    And if you want to build your body without it flared so it fits in your trailer then go ahead. But those of us who want to give some character to our cars should be allowed to.

    Leave a comment:


  • lazyifoto
    replied
    I have been calling for URR Unified Rules Racing for years. This is a big step in the correct direction. ..the best rules from the best tracks and car building rules that are the same all across this great country of ours.. This will be better for the racers and the tracks...

    Leave a comment:


  • Action10
    replied
    Originally posted by JabberJaws83 View Post
    It can work, and should work, they just need to be smart about it.
    Being smart about it depends on the lens you are looking through. I am not attaching any names to this, just speaking in general terms... If what is best for the sport isn't necessarily what is best for an individual person or a company, what would be smart of them to do? Should they do what is best for the industry as a whole and possibly make less money and have less success with their business? Would they be better off to make as much money as possible while business is booming, only leading a slow downfall of the sport? I don't know if there is any "correct" answer to that question...

    Leave a comment:

Working...
X