Sniper, BMF and now Mach X, formerly known as Cat 5. The man is a machine.
BruceBilt makes three different chassis.
Collapse
X
-
Comment
-
Very good point. I have wondered that myself. I guess Bruce builds all three different chassis, and then Weiss, Hedgc*ck and now the Seaswrights take them to their respective shops to finish them and put their own personal touches to the cars.Originally posted by Tireguy17 View PostHow does the technology/measurements not bleed between the different chassis with 1 group building them all?
Comment
-
I don't think tnt is a copy of any one chassis. I think you may be thinking of dixie metal works or Somthing along those lines. I know he had copied a long horn and possibly a rocket .but i Beleive he would build you anything you wanted as far as a hybrid between the two and if i recall he built alot of them out of mild steel. And yes i think their were a few guys going pretty good in themOriginally posted by over4T View PostHasn't TNT basically built copies of several different brands for several years and, I understand, been successful at it? So it's certainly possible.
Comment
-
Bruce was the fabricator for the Goddard’s at Warrior Race Cars when Bloomquist used Warrior chasis. Afterward he worked for Scott building the Team Zero cars before starting Brucebuilt Performance.
TNT race cars have been building cars for decades. It is owned by Jenson Ford’s father- Randy Ford. He built many cars when Volunteer Speedway raced weekly.
Comment
-
-
Depends on what your going for. If you just want to do knockoffs you copy as close as you can to original. If you start hybridizing, ie putting LH front with a Rocket rear and a Zero cage you may end up with a turd. These cars, like LH are designed in total to work together, not piece mill. Its why putting a Zero front end on a Rocket and calling it "Orange" didnt work. Unless you have a knack for experimentation and patience to match, I wouldn't recommend the "Mix & match" approach. Today most racers have no patience to struggle thru the learning phase, like before Joe Garrison died he put a new car design together, I forget who drove it and went to Florida for speedweeks. They struggled and if memory serves the driver quit before they left Florida and the 4m'rs wrote him off before he could make any changes with what they learned.. Today they expect (new design) cars to work perfect right out the jig, but sometimes the best ideas, the most idealistic combos, they suck.Originally posted by Tireguy17 View PostHow does the technology/measurements not bleed between the different chassis with 1 group building them all?"In the Republic of Mediocrity, Genius is Dangerous." - Robert Green Ingersoll
Comment
-
That Chassis Owens made looked pretty quick out of the box. Wish he had the resources to experiment more or get Bruce to build him the same idea.Originally posted by Henry Every View Post
Today they expect (new design) cars to work perfect right out the jig, but sometimes the best ideas, the most idealistic combos, they suck.
Comment
-
Comment