how to tell year of warrior?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • street28
    Member
    • Aug 2009
    • 58

    #1

    how to tell year of warrior?

    Looking at a warrior and was wanting to know if they have numbers or a way to identify year? Has 5 holes for upper 4 bars and 3 for lower bars, under rail car, square upright that j bar adjust moves on, fuel cell mounts on what looks to be 2x3 tubing that runs front to back. Thats all I have seen that might help identify. Any help would be great even where chassis number is. thanks in advance
  • phenom08
    Senior Member
    • Jun 2007
    • 228

    #2
    Should have a number on the bar where the master cylnders, msd box, etc are located.

    Comment

    • street28
      Member
      • Aug 2009
      • 58

      #3
      Loooked down through access panel for a number on the bars and didnt see one. I looked on warrior site and only showed 03 and 04 as underail cars so I guess its a 03 or 04.

      Comment

      • gadirtracer
        Senior Member
        • Dec 2007
        • 1039

        #4
        Chassis # should be on the rear steering shaft heim mount. (Heim closest to driver.)
        Get it and call Warrior, they've always been helpful to me.
        BTW, I have a '96 w/under-rail.
        Gill T. Azell

        Comment

        • street28
          Member
          • Aug 2009
          • 58

          #5
          the steering shaft is not in the car and there is no rear mount under the dash? There looks as if they may have been a clamp on mount but not for sure. The owner says car is just like he bought it he has never done anything with it.

          Comment

          • Jim11h
            Senior Member
            • May 2007
            • 1501

            #6
            old

            i had a 94 over rail and it was 2x2 square. if your a 2x3 i would guess its an early warrior. call them and speak with them and they can get you in ball park of year and setup info. they are super great to speak with

            Comment

            • street28
              Member
              • Aug 2009
              • 58

              #7
              Fuel cell is mounted to 2x3" fuel cell brackets. frame is 2" round tube. Sorry for confusion on that. Also front bumper that is on it slides into front frame horns and is held in with 1/4" bolt on both sides. Also noticed battery mount is kinda above/beside trans.
              Last edited by street28; 07-04-2011, 04:41 PM.

              Comment

              • brad hibbard
                Senior Member
                • Oct 2007
                • 974

                #8
                call Doug

                Call Doug Horton 304-288-3298

                Comment

                • gadirtracer
                  Senior Member
                  • Dec 2007
                  • 1039

                  #9
                  Originally posted by brad hibbard View Post
                  Call Doug Horton 304-288-3298
                  I see Doug Horton has a 304 area code, West Virginia. Do you know if Doug, in the past, like mid to late '90's, was modifying Warrior chassis out of his shop?
                  The car I'm racing now originated from that area.
                  Gill T. Azell

                  Comment

                  Working...
                  X