Flywheel bolts

[FF21]

What flywheel bolts do you use for the bert flywheel?I know there 7/16 fine thread but do you have to use a 12 point head bolt?Because the 5/8 socket won't even fit in the slot to tighten a regular 7/16 bolt.Thanks for any kind of info on this.Rick

[JAMESGANGRACING]

I used allen bolts and they work just fine

[sj valley dave]

We've used both a 12 point and Allen for our Bert Couplers...

[FF21]

Thanks for the responce fellas.I got the allen bolts.Work like a charm.Thanks again Rick

[cox7key]

Flywheel bolts

I have heard of forums and kind of know what they are. My question is what do you write on a forum, like stuff thats on your mind or just whatever? And what websites can i logon to to start forums?what are some good and popular websites for forums???.

Locksmith Glen Burnie MD
Locksmith Haltom City TX
Locksmith Lewisville TX
Livonia MI Locksmith
Grand Rapids Locksmith
Cambridge Locksmith
Locksmith Miami Beach
Mountain View CA Locksmith
Locksmith Mount Laurel
Locksmith national city CA
Locksmith Novi MI
Opa locka Locksmith
Locksmith Pinellas Park
Locksmith Placentia
Locksmith Mesa AZ
Ontario Locksmith
Rancho San Deigo Locksmith
Redlands Locksmith
Locksmith Rancho Palos Verdes
Rowlett TX Locksmith
Sanford Locksmith
Locksmiths San Francisco
santee Locksmith
Locksmith Pontiac MI
Locksmiths Randallstown
Locksmith spring valley CA
Sterling Heights MI Locksmith
Locksmith Sunny isles
Tinley Park Locksmith

[brad hibbard]

Thanks for the responce fellas.I got the allen bolts.Work like a charm.Thanks again Rick

Rick,
watch the length-----on a Bert flywheel a 1 inch underhead bolt is the correct length

many times a 1 1/4 long bolt will bottom out on the last thread making it "feel" tight but actually is not----consequently will break and then be very difficult to remove from crank

we use 1 inch long allen bolts with no washers and 1 drop of red threadlocker for bert flywheels

Brad

https://www.race-1.com

[FF21]

Thanks Brad.Thats exactly what I had done