Nose Valance

[Arrington002]

Anyone know if the AR valance will fit the MD3 nose?

[bowtech]

I would think u could make it work

[JustAddDirt]

I build bodies on UMP mods.
I haven't done a late model sine 04 when I last drove 1.
My buddy has a crate, and I did a body for him, and when it came to the nose, wow a lot has changed in 10-12 years.
Done a MD3 for him first. Then he saw the AR and liked it better, so I done the AR. Well the MD# is now the backup nose and bumper assembly. The AR is far easier to do the valance.

the AR is a much better design as far as the valance
MD3 is way too time consuming. but flares are easier to get to fit properly.
Done the AR valance in no time compared to the MD3, and if you use the AR Valance attachment kit it is even easier.

[Matt49]

The new MD3 that just came out for this season supposedly has the lip on the bottom already cut to accept the valance.

[JustAddDirt]

They ought to do like the AR and just die cut the piece of flat, instead of the molded deal.
JMO thought.

[Matt49]

They ought to do like the AR and just die cut the piece of flat, instead of the molded deal.
JMO thought.

I sort of agree. The flat material will still accomplish what we're trying to do with the air but not tear up as bad if/when it gets into the race track.