Tweet
I just got my new 604 in the car and primed the engine oil system for a good bit. Oil was trickling out all pushrods after a long prime. I used BradPenn break in oil. I've had good luck with it in race engines so I stuck with it. My question is this... Several local racers in crate who helped me get going say to do 1 race on the break in oil and dump it and the filter. Should I be nervous about their advice? I can't say they have engine trouble and they run every weekend. I was just a little nervous about running the break in oil for a race. Is this procedure common? I wish I could afford to run Joe Gibbs once I get switched over to race oil. Thanks guys.
-
-
mopar 92
I agree with running break in oil for a full race and Brad Penn is good oil
please check our website or call us so we can help you with through race prep of your new engine
the 3 biggest things are
the valves are NOT adjusted or locked
the balancer should be checked for TDC
the 3 rear galley plugs above the camshaft need to be checked for tightness
the rest of our recommended checklist should be completed but the hot items are listed above
please call with any questions or problems
Brad Hibbard
Race-1
330-540-7223 call or text
brad@race-1.com email
www.race-1.com website -
You've been a great help, as is your website. I followed it all to the T... I think after this first race I'll suck it up and go Joe Gibbs. Thanks for the quick reply.Comment
Comment