Stagger?

[ace1]

What would be a ball park start with stagger, frt. and rear, on a high bank, dry 1/4 ml track

[MasterSbilt_Racer]

What would be a ball park start with stagger, frt. and rear, on a high bank, dry 1/4 ml track

Corner radius is the most important factor. That said, 1" in front and 4" in the rear is never going to be totally wrong.

[ace1]

Its a sweeping turn on the gas track. What would be some roll out on the tires be. I have to swap some tires around but at the moment I have right sides at 91 1/2", lefts at 86 1/2. I have to learn what number size tire goes where. The latemodel tires are a new thing for me. Thanks

[MasterSbilt_Racer]

Most run 28.5 diameter on the front and lr. Bigger chalk marks on front.

88 or 89" on front.

87 lr. 91rr

[RW57]

We use the 91/s on RR RF LF 86 LR mainly to carry less tires all 3 tires are nearly the same size offsets are the same we always put tire we take off on LF saving a little money that way.

[Kwoods25]

We usually start about 1/2 to 3/4 across front. And about 4 1/2 to 5 1/2 across rear. We run a tight corner high banked track