RR on ice exit?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sidewinder69
    Member
    • Sep 2016
    • 95

    #1

    RR on ice exit?

    How is it possible if you shortened rr rods, dropped j bar on pinion, drop lr and rr bottom rods, took out stagger, took out rf rebound, took out dummy shock compression ,lowered right side air..... Still get in and steer but absolutely no scotch and forward on exit.
  • fastford
    Senior Member
    • Dec 2008
    • 4059

    #2
    are you sure you haven't made the car so tight that your having to break it loose to make it turn? happens a lot, a simple piece of tape on steering wheel can tell a lot......

    Comment

    • sidewinder69
      Member
      • Sep 2016
      • 95

      #3
      I thought about it but no I can get im good and the car rotates well

      Comment

      • Stede Bonnet
        Senior Member
        • Sep 2016
        • 325

        #4
        Perhaps a bind. Why take rebound out of RF, that'll lose drive? No scotch tells me there is a bind or bad shock w/bent shaft perhaps.
        Politically Incorrect.

        Comment

        • sidewinder69
          Member
          • Sep 2016
          • 95

          #5
          I always though if you take rebound out rf it allow to transfer back to lr for better drive ?

          Comment

          • Matt49
            Senior Member
            • Jun 2007
            • 3123

            #6
            Originally posted by sidewinder69 View Post
            I always though if you take rebound out rf it allow to transfer back to lr for better drive ?
            That is exactly what it does. Taking RF rebound out is a common and quite effective adjustment to help promote drive when the track get slick.

            Do you have a lot of lead ballast in your car? If so, how high do you have it all mounted?

            Comment

            • sidewinder69
              Member
              • Sep 2016
              • 95

              #7
              I got all the lead right under deck high as possible. One piece above lr and 3 pieces roughly 60 lbs on 5th coil bar towards rear.

              Comment

              • Matt49
                Senior Member
                • Jun 2007
                • 3123

                #8
                It should transfer weight pretty good then. It's possible that you have too much static left side or not enough rear. Also possible something is binding, bad shock, etc.

                Comment

                • sidewinder69
                  Member
                  • Sep 2016
                  • 95

                  #9
                  52.4 rear percentage

                  Comment

                  • Matt49
                    Senior Member
                    • Jun 2007
                    • 3123

                    #10
                    Originally posted by sidewinder69 View Post
                    52.4 rear percentage
                    That's pretty low in my opinion.

                    Regardless of chassis make, I've always felt that 53.5 left and 53.5 rear was a good starting point. For slicker conditions, 54-54.5 rear is even better but you have to be sure the car will turn in the center without having to slide it.

                    Comment

                    • sidewinder69
                      Member
                      • Sep 2016
                      • 95

                      #11
                      i run blue xs battery which i think around 45 lbs was in center of the car, just moved it to above left rear. havent gotten on scales yet but should help a ton. did not know that a percent or 2 would make that much of a difference

                      Comment

                      • Matt49
                        Senior Member
                        • Jun 2007
                        • 3123

                        #12
                        Originally posted by sidewinder69 View Post
                        i run blue xs battery which i think around 45 lbs was in center of the car, just moved it to above left rear. havent gotten on scales yet but should help a ton. did not know that a percent or 2 would make that much of a difference
                        0.5% makes a noticeable difference to me. There IS a reason that guys like Bloomquist work so hard on fuel cell designs that limit the mount of tail weight lost via fuel burn-off.

                        Comment

                        • CCHIEF
                          Senior Member
                          • Jul 2014
                          • 399

                          #13
                          Your not making and maintaining rr traction. Pretty generic answer, have you tried lowering the rr upper bar a lot @ frame? There are so many questions to be answered about your car, track and tires. Not knowing the car, setup, tires, and tires. it would seem to me you have got the car way too tight overall. What RR tire? 29.0 or 11.0
                          Last edited by CCHIEF; 11-01-2016, 10:14 PM.

                          Comment

                          • sidewinder69
                            Member
                            • Sep 2016
                            • 95

                            #14
                            ItIt's an open 1350. What does lowering rr top rod do ?

                            Comment

                            • Kromulous
                              Senior Member
                              • May 2007
                              • 3008

                              #15
                              Takes drive out of the RR, its a good adjustment.

                              Just say no...

                              Comment

                              Working...
                              X