but does it take out scotch of the rr? like where you feel like your somewhat against a cushion so it catches car somewhat so you can start going forward
RR on ice exit?
Collapse
X
-
-
If you ever have a car that feels like that, it is way too tight. This will then cause you to turn the wheel left to complete the corner and you will lose all forward bite from there. This is the classic "too tight in, too loose off" condition that most racers tune themselves into and then continue to tighten that car because they are loose off...making the problem worse and worse.
I'd be willing to bet if you put all of your bars back where they were and get your rear percentage up to something more reasonable, you won't be too far off.
Comment
-
thats actually what i am doing . im trying to be careful in diagnosing it correctly , i guess timing would be the more importance of what im trying to deal with because it feels good in the traction and when it slicks its good getting in... its just that point once your leaving center and you need that scotch or forward whatever you want to call it. i wondered if i needed more caster to help load because i have 1.5 and 4.5 as of right now
Comment
-
Sidebite? thats what i would referr to that as.
Next year i am going to weld in a new RR mount, and run a stiffer spring, and add about 10 ish degrees of angle to the inside. That and try a 2 stage spring, and maybe a softish bumbstop.
I think he is looking for the car to firm up in the center, this scotch thing, sidebite whatever. I agree if you feel that going in your dead. Free in, and the firm up on the RR in the middle and go with the pedal. Maybe thats all wrong but we have been looking for the same feel.
Just say no...
Comment
-
thats exactly right . looking for some sidebite i guess once i get to center to enhance the exit. i do know my rr shock is leaned in much further than my lr behind
Comment
-
-
I'd bet money this is the issue: if the following is true
Is this a rocket? Is your left side % under 54.0 with you in the car?
If so, I've seen this a few times and it's the % and moving the battery from the center of the car around the x member to the LR will generally fix the problem.
Does the car get up on the LR if there is any brown or traction to put the LR tire in but in the dead slick the car is really lazy or don't get up on LR at all?
Comment
-
It is a barry Wright with around 54 percent left. It does decent if the left rear is in some sort of moisture but totally dead in black... But pictures show it is on bars to some extinct. I do have 5 1/4 drop
Comment
-
if the reason it feels good getting in , in the slick , is that the rear is sliding, then you have lost all forward drive right there. with the set up you gave ,to me , it would have to be tight , i think matt gave you the best advice.Originally posted by sidewinder69 View Postthats actually what i am doing . im trying to be careful in diagnosing it correctly , i guess timing would be the more importance of what im trying to deal with because it feels good in the traction and when it slicks its good getting in... its just that point once your leaving center and you need that scotch or forward whatever you want to call it. i wondered if i needed more caster to help load because i have 1.5 and 4.5 as of right now
Comment
-
i say it feels good because when i drive in and apply brake either trail brakin or not, i dont feel the need to countersteer and chase the rear end. nor do i need to stab the brake to rotate the car, it seems to be pretty neutral but there again i could be wrong but thats my first thought.
Comment
-
I'd get your rear percentage up to at least 54.5 with driver. You might pick up a slight push on corner entry, so keep that in mind.
I've been anywhere from 50% rear to 57% and feel like 54 - 55.5 works the best for me. With 50 - 52, the car steers good but the rear tires feel like they are not loaded enough. If I get too much rear, the car gets lazy on initial turn-in and doesn't get on the RF hard enough, then the pendulum effect takes over mid-corner and then I'm free on exit. Similar to what you're fighting now, but for a different reason.
Comment
-
very good analysis to help go off of masters. i appreciate that... one question just throwing it out there. can different spindles and caster combos affect any of this?
Comment
-
Absolutely! More caster creates a weight jacking effect. When you turn the front wheels to the right, it loads the LR and unloads the RR. What I've found is that if you've got a bit of a loose condition getting in the corner, excessive caster makes it way worse because as you counter steer it is unloading the RR. Just makes it hard to "catch" the car.Originally posted by sidewinder69 View Postvery good analysis to help go off of masters. i appreciate that... one question just throwing it out there. can different spindles and caster combos affect any of this?
There are plenty that disagree with me but I think minimal caster (and minimal caster split) works best with the way the cars are now.
Comment
-
I've heard that before but was thinking when I counter steered , by loading the lr that would be forward traction especially good in the slick right ? And then what if you went with no split.
Comment
Comment