Rocket Orange Front

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rickybobby23
    Member
    • Sep 2012
    • 30

    #1

    Rocket Orange Front

    Looking at upgrading from an older Rocket to a newer one. Found a 2011 or 2012 Orange front for sale recently. I haven't heard a lot about them recently, so I didn't know if this would be a decent buy or if I would be better off going to a blue/grey around the same year. I plan to run it as a crate car. I don't have deep enough pockets for a brand new one. Any input is appreciated. Thanks
  • CHIP DAWH
    Member
    • Mar 2009
    • 44

    #2
    Go with Blue front car. The Orange stuff didn't go over well not sure why as I have never driven one. The Blue car is a nice car they turn in well. Also a lot more info and help available on Blue car. Make sure you get car with updated front cross member makes a big difference in clearance.

    Comment

    • m_stagev
      Member
      • Jan 2010
      • 61

      #3
      A lot of the series guys ran orange cars with blue front parts on them and thought they were more friendly from track to track.

      Comment

      • rickybobby23
        Member
        • Sep 2012
        • 30

        #4
        So what all blue front parts did they use?

        Comment

        • m_stagev
          Member
          • Jan 2010
          • 61

          #5
          uppers,lowers,spindles,1" spacers on rf

          Comment

          • dmzona
            Junior Member
            • Nov 2012
            • 10

            #6
            I like the orange better than the blue/gray, just sold the blue/gray car and kept the orange

            Comment

            • DK1
              Senior Member
              • May 2008
              • 257

              #7
              Originally posted by m_stagev View Post
              uppers,lowers,spindles,1" spacers on rf
              I had a orange car that had blue front end on it. You can use the blue upper and lower control arms with your orange spindles. Left side is the same will be the same, right side needs a 1/2" taller ball joint since the orange spindle is shorter. I never heard anything about a 1" spacer and I got all my parts and info from Rocket.

              Comment

              • m_stagev
                Member
                • Jan 2010
                • 61

                #8
                if i remember right spacers go between rf upper and frame. i am sure robbie at rocket knows give him a call or DEK consulting.

                Comment

                Working...
                X