Jbar

[dirtslinger4]

Moving jbar from outside the frame rail to the inside and keeping the same side to side measurements. What to expect? Going to test tonight and that's one of the things I was going to try. Thanks in advance

[MasterSbilt_Racer]

Basically, things will just happen quicker as far as hike up and roll. The rear will move farther left during roll as well. That should tighten the car a bit.

[grt74]

Moving jbar from outside the frame rail to the inside and keeping the same side to side measurements. What to expect? Going to test tonight and that's one of the things I was going to try. Thanks in advance

a little more free in, tighter middle, off
start off with a little less angle (just a little, one hole down on the frame maybe)