Tweet
Does anyone have a clear picture of the teather used on the left front of a rocket or is this a kit available from rocket -- thanks in advance -- happy thanksgiving
-
-
Yes they have a kit but u can go to lowes or home depot and get some .25 cable and some smash collars and make ur own -
Rocket does not approve of imposter tethers made from inferior materials. (* Sarcasm*)Modern Day Spec Wedge RacingComment
-
Better take that down before you get sued for slander MB...Originally posted by MasterSbilt_Racer View PostComment
-
I am already on the Jackson Jr no XR1 list...Modern Day Spec Wedge RacingComment
-
-
I'm still waiting to get approved buy a new Howe 3rd design....Member of the Luxemburg Speedway Hall of Fame
Class of 2019Comment
-
-
I use an old seatbelt crotchstrap and the mounting ends for it. 1 reason it is adjustable to fine tune, 2 it already has 1/2†bolt holes in it, so it is a quick easy installation, just put in a longer bolt, and a spacer to keep it away from shock body. ( I run Modifieds ) If on a coilover, I would run an outerwears over the spring so it wouldn’t get caught in coils.I think there should be lifeguards in the genepool.Comment
-
Nothing special there. An easy cheap lit from the Rock Crawler world is good as they use these on all 4 corners most times.
http://www.ebay.com/bhp/limit-strapsComment
-
^$35??? chaining the LF or any other corner is a <$10 adjustment.Originally posted by Lizardracing View Post
Dont over think it peopleComment
Comment