Bert shifter

[shawburn]

New to Bert trans. Older Bert. Looking at the trans where shift linkage connects, which is high/low and which is reverse the top or bottom? Using the shifters I can get both to move forward independently which pulls shifters out of trans, but cannot get either to go back? Does car have to be moving? Hopefully making myself clear. Any help is appreciated.

[Lizardracing]

Top is LOW/HIGH
Bottom is reverse.

One shaft has to be in neutral before the other will move.

[Matt49]

New to Bert trans. Older Bert. Looking at the trans where shift linkage connects, which is high/low and which is reverse the top or bottom? Using the shifters I can get both to move forward independently which pulls shifters out of trans, but cannot get either to go back? Does car have to be moving? Hopefully making myself clear. Any help is appreciated.

Bottom is R/N. Out is R. Nut lined up with housing is N
Top is H/N/L. Out is L. Nut lined up with housing is N, Nut inside housing is H.

[shawburn]

Thanks that is what I was looking for. Was not sure if nut goes into housing. Thanks.

[Krooser]

The big nut goes behind the steering wheel...

[shawburn]

And in my case it is!!!