MD3 Evo vs Evo2 nose

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sidebite7
    Member
    • Feb 2013
    • 32

    #1

    MD3 Evo vs Evo2 nose

    I see cars with the newer nose and some with the older one.. Whats the reason for this ? Is one nose better for a certain type of tracks ?
  • Punisher88
    Senior Member
    • Nov 2014
    • 495

    #2
    Rocket 1 car doesn't even run the evo. They run the first gen. I think its preference. I was able to get the left side higher on the evo 2 and the right side flatter. The evo 1 has a flat rf flipper option but it doesn't lay nearly as flat as the evo2, without trimming most of the time. The evo2 is quite a bit more expensive though.

    Comment

    • CCHIEF
      Senior Member
      • Jul 2014
      • 399

      #3
      Evo 2 allows you to get clearence on RF on older cars that the RF frame sits lower out front. AFAIK

      Comment

      • billetbirdcage
        Senior Member
        • May 2007
        • 2019

        #4
        Originally posted by Punisher88 View Post
        Rocket 1 car doesn't even run the evo. They run the first gen. I think its preference. I was able to get the left side higher on the evo 2 and the right side flatter. The evo 1 has a flat rf flipper option but it doesn't lay nearly as flat as the evo2, without trimming most of the time. The evo2 is quite a bit more expensive though.
        It's been a really long time, but last time I asked mark why they wasn't using the newer nose he said: basically the new noses hadn't been proven to him to be better so they was staying with what worked for them.

        Now, I took that as he just had no data that said they was better at the time and no idea if he has gotten any data since or just had a stock pile of them and everyone wants the newer noses so he could be using them up since they aren't selling.

        Comment

        Working...
        X